Questions & Answers
Questions: What size fittings/thread pitch are the inlets?
Question By: Rick Segrest on Jan 19 2019 6:32 PM
The paper work shows 3/8"
Answer By: Willys Jeep Parts Tech on Jan 21 2019 1:27 PM
Questions: Does the regulator have marks on it for setting pressure or do you need to use a gauge to set itJ
Question By: John Nichols on Jan 12 2018 4:21 PM
You will need to use a gauge to set it.
Answer By: Willys Jeep Parts Tech on Jan 10 2018 8:35 AM
Questions: It's my understanding the regulator comes preset from the factory. Do you know what pressure it's set for (2lbs?).
Question By: Daryl Walker on Mar 3 2017 5:09 AM
It regulates between 2-4 pounds.
Answer By: Willys Jeep Parts Tech on Mar 3 2017 6:14 AM
Questions: This regulator looks like it has three openings. Is the bottom the inlet side and the top two out put sides. Do you block off one side if not needed? I don't understand the two out put openings, I thought it woud only have one?
Question By: Phillip A. Perrine on Feb 6 2017 11:17 PM
It is designed for a number of applications. You would only use the in/out ports.
Answer By: Willys Jeep Parts Tech on Feb 7 2017 5:59 AM
Questions: Is this regulator adjustable? I run a solex carburettor on my CJ2A and the fuel pressure should be 1.5psi
Question By: Gideon on Jan 12 2012 12:00 AM
Yes this is adjustable.
Answer By: Willys Tech on Jan 12 2012 12:00 AM
Questions: after replaceing fuel pump and carb do i need this? 1950 jeepster L134 motor
Question By: kevin on Sep 6 2011 12:00 AM
This will regulate your pressure if you find you are putting out too much fuel.
Answer By: Willys Tech on Sep 6 2011 12:00 AM