Questions & Answers
Questions: What kit will work on a 1957 pick up with original metal fuel tank ? Has two straps under tank.
Question By: Fred Alford on Nov 28 2019 7:44 PM
I suppose you could lay it under the straps. you would have extra material most likely as spare.
Answer By: Willys Jeep Parts Tech on Dec 2 2019 5:32 AM
Questions: Sir I have the pattern down, but is there a certain distance from the edge of the side of the tank to the strip. I would really appreciate you return. Thank you for what you are doing to help restorers. Tony A WV
Question By: Tony Ankrom on Jan 26 2018 7:52 PM
Email firstname.lastname@example.org we can send you over a drawing of where they go.
Answer By: Willys Jeep Parts Tech on Jan 29 2018 5:56 AM
Questions: The kit has 8 strips, 2 each of 4 lengths. The drawing here shows 3 lengths with 2 each on 2 sizes and 3 of a longer size. Do you have a different drawing for the strips actually in the kit?
Question By: Brooks Rajala on Nov 18 2017 3:19 PM
They really just line the bottom of the tank. We lay them equal distance from one another. its just trying to create a buffer so your not metal on metal contact.
Answer By: Willys Jeep Parts Tech on Nov 20 2017 5:43 AM
Questions: Are these insulator strips supposed to be glued to the tank or to the floor under the tank?
Question By: Steve Comer on Jan 3 2017 10:13 PM
I typically use adhesive to the bottom of the tank.
Answer By: Willys Jeep Parts Tech on Jan 4 2017 5:45 AM
Questions: Is there a certain placement of these strips? What areas do they need to cover? Do any go on the hold down clamp on the rear of the tank? Was nor able to see how the straps were placed as the old fuel tank had no welting strips under it.
Question By: Joe on Jul 23 2016 10:35 PM
We have a diagram we can scan in and email to you. Please email email@example.com and we can help.
Answer By: Willys Jeep parts tech on Jul 25 2016 5:54 AM
Questions: how are these applied to the tank
Question By: steve mccully on Jul 17 2016 1:26 PM
We typically use an automotive adhesive to apply.
Answer By: Willys Jeep Parts Tech on Jul 18 2016 5:48 AM
Questions: What is the difference between this kit and the anti-squeak kit? Do you need both? Is one better recommended over the other?
Question By: Anonymous on Jan 26 2014 12:00 AM
This one is a welt material. The other kit is a felt material. Both are interchangable.
Answer By: Willys Tech on Jan 27 2014 12:00 AM
Questions: Are these felt or rubber . My old tank rotted out where the felt would hold moisture .
Question By: Anonymous on Sep 28 2012 12:00 AM
They are a water resistant welting. Like original.
Answer By: Willys Tech on Oct 1 2012 12:00 AM