Product Videos
Questions & Answers
Sort By:
Questions: I purchased this unit and the corresponding gauge and it worked fine for a few years. Now the gauge always reads above full. I'm trying to test the sending unit to see if it is the gauge or the sender that has failed. What is the proper ohm reading when testing the sending unit.
Question By: Dennis Skillen on Jun 6 2021 10:19 PM
I would check your ground if it is arching. Email mike@kaiserwillys.com to help.
Answer By: Willys Jeep Parts Tech on Jun 7 2021 5:32 AM
Questions: I have a 1968 M151 A1 24v . Will this work on my jeep?
Question By: Ronnie Goode on Jan 1 2020 12:41 PM
Sorry, I believe they are different.
Answer By: Willys Jeep Parts Tech on Jan 2 2020 5:42 AM
Questions: Have a1954 M38A1 Willy's with 24 volt system. Need fuel sending unit. The old one is a five hole with 6 1/4" down shaft and has a Douglas connecter. Which sender do I need?
Question By: Grady Thibodeaux on Aug 26 2019 4:54 PM
800204 is the sending unit you need.
Answer By: Willys Jeep Parts Tech on Aug 26 2019 12:45 PM
Questions: I have 1952 m38a1 converted to 12 volts what fuel tank sending unit will work
Question By: Wilfred J huggins on Sep 25 2017 10:54 AM
No, this sending unit is only for the 24 volt system. Order parts number 640694. That will work for you. Thanks
Answer By: Willys Jeep Parts Tech on Sep 25 2017 5:14 AM
Questions: Hi, do you have the cable that would connect this to the fuel gauge? Mine had been removed by the previous owner.
Question By: Robert on Jun 8 2013 12:00 AM
That is just a simple wire hook up. We do sell complete wiring harnesses...
Answer By: Willys Tech on Jun 10 2013 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
