Questions & Answers
Questions: On the dimmerswitch there are 3 places to hook up to which is the one to hook up the power supply?
Question By: John Seymour on Aug 4 2020 1:50 PM
Center is power. The LH/RH posts are HI/LO beam.
Answer By: Willys Jeep Parts Tech on Aug 4 2020 11:20 AM
Questions: Will this work on a 24volt system. M39 1951
Question By: Marc kresmery on Jul 25 2020 5:25 PM
No, this if tor 6 or 12 volts. There are two options for the 24 volt system and it depends on whether you have Douglass (8380675) or Packard (A1DIMMER) connections. Thanks
Answer By: Willys Jeep Parts Tech on Jul 27 2020 4:06 AM
Questions: Please send wireing diagram.
Question By: Dennis on Sep 15 2017 7:19 PM
Sorry, i dont have a diagram but really its just the hi and low wire on either side then power wire going to this.
Answer By: Willys Jeep Parts Tech on Sep 15 2017 12:49 PM
Questions: Could you send wire diagram this switch?
Question By: Tom S on Jan 21 2015 12:00 AM
The center post is power. The posts to either side of the center post are hi/low. You can wire it either way.
Answer By: Willys Tech on Jan 21 2015 12:00 AM
Questions: Is this for 6v or 12v? Will this work with a 12v system?
Question By: Big Willy on Mar 26 2013 12:00 AM
It is for both 6volt and 12volt.
Answer By: Willys Tech on Mar 27 2013 12:00 AM
Questions: will this switch work for an FC-170
Question By: Anonymous on Jan 23 2012 12:00 AM
Yes it should work just fine.
Answer By: Willys Tech on Jan 24 2012 12:00 AM