Questions & Answers
Questions: My question is not for a Jeep but I am wanting to run a Jeep gas tank under the pass. seat of my 1930 Ford Model A . I'm looking at part number 640685 for the tank .Is this the part that I need for a sending unit.? I know that this is out of the usual but that's kinda how I work. Thanks for any help you can be with this.
Question By: roy jeffery on Dec 1 2020 12:45 AM
640694 is the part number for the sending unit for the 640685 tank.
Answer By: Willys Jeep Parts Tech on Dec 1 2020 5:32 AM
Questions: Which 6 bolt fuel sending unit will work with this gauge? This gauge reads full at approx 11 ohm and empty at about 115 ohm.
Question By: Rusty Gavagan on Dec 19 2019 12:14 AM
Please email firstname.lastname@example.org more vehicle information so we can try to help out. Thanks!
Answer By: Willys Jeep Parts Tech on Dec 19 2019 5:35 AM
Questions: For wiring on this fuel gauge, one terminal to sending unit, one to ignition. is there a ground?
Question By: Nate on May 31 2019 8:49 PM
I will double check the wiring but I do believe it is grounded off the bracket.
Answer By: Willys Jeep Parts Tech on Jun 3 2019 5:39 AM
Questions: will this guage fit and work in a 47 cj2a
Question By: gerald ross on Aug 15 2017 10:44 PM
Yes, this would work for the CJ-2A as well.
Answer By: Willys Jeep Parts Tech on Aug 16 2017 5:53 AM
Questions: i have a m38 converted to 12v and a fuel cell, the sending unit reads 0 omhs when empty.. will it work with this gauge?, whats the empty for full omhs range?
Question By: Matt on Apr 13 2015 12:00 AM
7-9 Full and 130-140 Empty
Answer By: Admin on Apr 14 2015 12:00 AM
Questions: I bought a new plastic tank and gauge from you for my 53 pickup I have no fuel gauge in dash can I use this gauge with my new sending unit ?its 12 volt
Question By: Anonymous on Apr 1 2015 12:00 AM
Im sure that it could be made to work.
Answer By: Willys Tech on Apr 2 2015 12:00 AM
Questions: will this gauge work in a 54cj3b with a 12v system,I would rather have one made in USA than the omix ada
Question By: steve on Sep 6 2014 12:00 AM
Yes, this should work for you I believe.
Answer By: Willys Tech on Sep 8 2014 12:00 AM
Questions: This piece comes in olive green? thanks !.
Question By: willy avla on Jun 21 2014 12:00 AM
The outside bezel comes in OD like original.
Answer By: Willys Tech on Jun 23 2014 12:00 AM
Questions: Please clarify how this gauge can work on a 12v system (in heading) and also a 6v system (in description)?
Question By: Anonymous on May 22 2012 12:00 AM
This gauge is for a 12 volt system only. The one a 6 volt system is part number: A8184
Answer By: Willys Tech on May 23 2012 12:00 AM
Questions: Will this part work in a 1954 Station Wagon?
Question By: Henry on Feb 13 2012 12:00 AM
Im sure it will with modification.
Answer By: Willys Tech on Feb 13 2012 12:00 AM
Questions: What is the diameter of the gauge body? I need 2 for M38 panel.
Question By: Anonymous on Jun 17 2011 12:00 AM
This will work just fine.
Answer By: Willys Tech on Jun 20 2011 12:00 AM