Product Videos
Questions & Answers
Sort By:
Questions: What is the thread on the oil fitting for this gauge? 1/8 NPT?
Question By: ChrisS on Sep 26 2019 1:15 AM
A-1198-ST is what screws to the back of the gauge. It takes a very odd ball size.
Answer By: Willys Jeep Parts Tech on Sep 26 2019 11:07 AM
Questions: Hi, I have this gauge, but I need whatever hardware and hoses to run it from the engine to the gauge thru the firewall to the gauge. do you have this? What would the numbers for ordering be? What I have now is later aftermarket and the hoses etc won't fit in the back of the gauge Thanks...
Question By: Philip A Lauricella on Aug 13 2019 9:36 PM
A-1198-ST
A1198
A4436
these are what you need above to get to the lower galley on the drivers side of the block.
Answer By: Willys Jeep Parts Tech on Aug 14 2019 5:54 AM
Questions: Can yo tell me the diameter of the guage?
The body, not the face.
Thanks!
Question By: GLENN TYLER on Jun 28 2018 2:37 AM
These are 2" gauges like original.
Answer By: Willys Jeep Parts Tech on Jun 28 2018 5:59 AM
Questions: Does this gauge need a sender unit?Does it run directly off oil pressure or do I have to buy a sender unit?
Question By: Anonymous on Jan 27 2014 12:00 AM
No it does not need a sender. It is a mechanical gauge. You need part numbers: A1198 and A-1198-ST.
Answer By: Willys Tech on Jan 28 2014 12:00 AM
Questions: I need a 12v electric gauge with sender. You don't state whether or not this gauge is electric or oil fed?
Question By: Anonymous on May 22 2012 12:00 AM
This is a pressure gauge just like original.
Answer By: Willys Tech on May 23 2012 12:00 AM
Questions: what does the oil gauge on an instrument panel mean?
Question By: Anonymous on Jul 16 2011 12:00 AM
This measures your oil pressure in the engine.
Answer By: Willys Tech on Jul 18 2011 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
