Product Videos
Questions & Answers
Sort By:
Questions: I purchased one of these oil gauges and every line kit I've found doesn't fit the back of the gauge. What size fitting do I need?
Question By: William on Dec 9 2017 12:17 PM
This is the union adapter that will work for you: A4436. Thanks!
Answer By: Willys Jeep Parts Tech on Dec 9 2017 7:39 AM
Questions: Hi i have just purchased the speedo plus the other gauges for my CJ2A Jeep but the oil gauge does not have a sender unit otherwise how does the oil pressure register on the gauge? and the sender unit must be calibrated to the gauge. Regards PAT
Question By: Pat Barron on Feb 27 2015 12:00 AM
The oil gauge is a pressure gauge and just lines into the block. Part numbers: A1198 & A-1198-ST.
Answer By: Willys Tech on Mar 2 2015 12:00 AM
Questions: I have this gauge and the original style oil pressure switch on my F head CJ5. I do. It see how I can connect the two parts. Do I need a different oil switch or sending unit?
Question By: Ian on Nov 25 2014 12:00 AM
You may need part number: A3557
Answer By: Willys Tech on Nov 25 2014 12:00 AM
Questions: All the gauges in my 1964 CJ3B are white face. I only need the oil and gas gauges. Could i get them white faces too?
Question By: Anonymous on Jun 2 2014 12:00 AM
They all were originally black face. Sounds like you have aftermarket gauges in there.
Answer By: Willys Tech on Jun 2 2014 12:00 AM
Questions: what's the diameter of this guage? Do they come as an electrical unit?
Question By: Gary on Jan 1 2014 12:00 AM
They are 2 gauges like original. These were all originally a mechanical gauge.
Answer By: Willys Tech on Jan 2 2014 12:00 AM
Questions: I have a 1962 Willys pickup. Will the amp and oil gauges work on my truck? And do you sell a sub panel for mounting them?
Question By: Bob on Nov 18 2013 12:00 AM
You would have to drill holes in your dash if you have a Willys Truck to make these work but yes they should function properly.
Answer By: Willys Tech on Nov 18 2013 12:00 AM
Questions: I have a 63 CJ5, my oil gauge quite working. I would like to keep my direct oil line pressure gauge, do you carry the replacement for it? also what pressure should my F-134 engine have?
Question By: Anonymous on Sep 15 2013 12:00 AM
We can help you convert over to a separate 2 round gauge if you like. Minimum safe oil pressure is 6 psi at idle and 20 psi at 2000 rpm.
Answer By: Willys Tech on Sep 16 2013 12:00 AM
Questions: Do you sale just the face ring for gauges.??
Question By: Anonymous on Nov 16 2012 12:00 AM
Sorry, you cant get them that way. This is a complete guage.
Answer By: Willys Tech on Nov 19 2012 12:00 AM
Questions: I was wondering what it would take to hook this into my 1961 cj5's oil system, and I was also wondering what could be causing my oil light not to work?
Question By: Anonymous on Aug 14 2012 12:00 AM
They never used this style on a CJ-5. You should have a oil sender to a dummy light in your cluster. Please call us toll free. We can help you.
Answer By: Willys Tech on Aug 14 2012 12:00 AM
Questions: What is a good oil pressure reading idleing on a 1948 Willys CJ2A with a L-134 motor? Thanks as Always, Harry
Question By: Harry on May 5 2012 12:00 AM
Minimum safe oil pressure at idle is 10psi. Normal gauge reading is 25psi.
Answer By: Willys Tech on May 7 2012 12:00 AM
Questions: Will this guage work on my 1963 CJ5 with a 12 volt system and do i need a different oil pressure switch than part # 938092?
Question By: Matthew on Feb 2 2012 12:00 AM
Yes but you will have to drill your grill. This is a pressure gauge and doesnt require a separate switch.
Answer By: Willys Tech on Feb 2 2012 12:00 AM
Questions: i have a 1954 cj3b with a hurricane engine and I can not find a oil filter anywhere on the engine. Is this suposed to have a filter? And if yes is it a canister type filter? And where would it be installed?
Question By: mike on Jan 3 2012 12:00 AM
They originally mounted in the front passenger side of the block. Alot of vehicles dont have them. They are a canister style filter. We do carry the complete kits.
Answer By: Willys Tech on Jan 3 2012 12:00 AM
Questions: Any reason this wouldn't work for a replacement gauge in a 71 cj5, it looks like a match for the stock gauge.
Question By: Doug on Dec 8 2011 12:00 AM
In 1971 the oil light was built into the speedometer cluster but for a separate gauge it would work fine.
Answer By: Willys Tech on Dec 8 2011 12:00 AM
Questions: will this fit 1952 m38 direck oil line
Question By: Anonymous on Jul 6 2011 12:00 AM
Maybe but you'll have to bend it.
Answer By: Willys Tech on Jul 7 2011 12:00 AM
Questions: Is the 647058 oil pressure gauge direct pressure or electric?
Question By: Greg on Mar 6 2011 12:00 AM
It is a pressure.
Answer By: Willys Tech on Mar 7 2011 12:00 AM
Questions: For a 6 volt to 12 volt coversion on a 1949 Jeepster, do I need to get new dash gauges, or just replace the bulbs?........John
Question By: Anonymous on Jan 13 2011 12:00 AM
Just the fuel gauge needs to be changed over.
Answer By: Willys Tech on Jan 13 2011 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
