Questions & Answers
Questions: I purchased the speedodemeter last year and I am now just getting around hooking it all up for my final on my build my guages have a symbol E, I hooked A to A gas gauge to full, Temp did not work, any guidence what I can do. Thank you
Question By: Daniel Shea on Sep 25 2017 6:27 PM
See part number: 914845 for our troubleshooting guide and wiring on this.
Answer By: Willys Jeep Parts Tech on Sep 25 2017 12:00 PM
Questions: Will these work in the speedo cluster of a '57 FC?
Question By: John on Apr 26 2017 4:47 AM
Yes, as long as you have the style where they are built into the cluster itself.
Answer By: Willys Jeep Parts Tech on Apr 26 2017 6:07 AM
Questions: I just received Item #914850 sending unit and item #8126919 fuel gage. how does the three stud gage mount in speedo head where old two stud gage was and how do you wire it?
Question By: Steve Gronlund on Dec 10 2016 8:32 PM
(+) is to power thru ignition (-) ground (s) is to sender in tank
Answer By: WIllys Jeep Parts Tech on Dec 12 2016 5:42 AM
Questions: Hello. Awhile back I ordered and recieved Part# 8126919K (for a 1961 CJ-5) I didn't use them. I have since accquired a 1961 Willys Sta. Wgn. It calls for kit # 8126919KA . Will the temp gauge work in my Sta.Wgn . ? Thank You
Question By: Roger Hart on Aug 6 2016 1:05 PM
Yes, this is the proper part for you for the style gauge 914845A.
Answer By: Willys Jeep Parts Tech on Aug 8 2016 5:32 AM
Questions: My kit didn't come with wiring schematic. Is this set kit set up for original factory wiring? Should the gauges be insulated with plastic washers?
Question By: Clint on Dec 20 2014 12:00 AM
Please see item number: 914845 for the wiring diagram. The gauge is marked on the back as well for wiring.
Answer By: Willys Tech on Dec 22 2014 12:00 AM
The fuel gauge with this set has 3 connections. One is "I", which is the 12 volt input. The 2nd is "A", which hooks to the "A" terminal on the Temperature gauge. The 3rd one is S, which is the fuel sender connection. The fuel gauge has an internal voltage regulator, which regulates the 12 volt input to 5 volts for the fuel gauge and the temperature gauge. The temperature gauge also has an "S" terminal for connection to the temperature sensor. On older CJ5s, the round instrument gauge will need to be modified by drilling a hole to use these gauges, as the old fuel gauge only has 2 terminals.
Answer By: WyoGreen on Dec 12 2016 12:47 AM
Questions: Does this work for 6 volt as well?
Question By: Mark on Dec 16 2014 12:00 AM
This is for 12 volt. Im sure you could drop it down though.
Answer By: Willys Tech on Dec 17 2014 12:00 AM
Questions: Hello, I have a 1964 CJ-5A. Are these replacements for the Stewart Warner gauges built inside the original 0-90 speedometer? and if so, how do you install these?
Question By: Marc DeRosier on Jul 22 2014 12:00 AM
Yes, these are the replacement gauges for the original. They install from the backside.
Answer By: Willys Tech on Jul 23 2014 12:00 AM
Questions: I have a 1965 cj 5. 134 f head. Does these gauges fit in the 0 to 90 speedometer? I think the speedometer is original.
Question By: Anonymous on Jun 6 2013 12:00 AM
Yes that is correct. It is a replacement for the originals.
Answer By: Willys Tech on Jun 6 2013 12:00 AM
Questions: can i buy just the fuel guage?
Question By: rich on Apr 4 2012 12:00 AM
We only have these in pairs.
Answer By: Willys Tech on Apr 4 2012 12:00 AM
Questions: Where can i find square gauges for 1954 pickup dash
Question By: Mark on Jan 23 2011 12:00 AM
Please call us toll free. We can help get you good used.
Answer By: Willys Tech on Jan 23 2011 12:00 AM