Questions & Answers
Questions: Trying to determine if my front spring shackles are the cause of 0° caster on my '54 3b. I suspect that they are not stock, but need to know the on centers dimension of the bolt holes of originals. Mine are 2¾" on centers, so if they are wrong, I'll buy these as replacements. Thanks, Tom
Question By: Tom Johnston on Feb 19 2021 9:02 PM
Please email firstname.lastname@example.org some images of your set up and we can help out.
Answer By: Willys Jeep Parts Tech on Feb 22 2021 5:40 AM
Questions: Is the bushing in this kit the same as bushing # 921055?
Question By: chuck shumway on Dec 7 2020 9:58 PM
Yes, that is correct.
Answer By: Willys Jeep Parts Tech on Dec 8 2020 5:27 AM
Questions: What width leaf spring is this for?
Question By: Anthony Galanti on Oct 7 2020 11:58 AM
1-3/4" like original.
Answer By: Willys Jeep Parts Tech on Oct 7 2020 6:12 AM
Questions: Does this shackle increase the overall height of the jeep? If not, do you offer a taller shackle for a CJ3B?
Question By: Mark T on Sep 3 2018 8:10 PM
This is a stock shackle so it won't really give you an additional lift height on the Jeep. I don't really have a shackle that will do that. If you replace the old leaf springs it will give you about an inch to and inch and a half lift. Thanks
Answer By: Willys Jeep Parts Tech on Sep 4 2018 6:50 AM
Questions: My 1952 M38A1 has the threaded bushings and the driver's front is completely destroyed. Will these work as a replacement for the threaded assembly?
Question By: Joseph on Dec 26 2017 6:46 AM
928764 is what you need to use on you M38A1
Answer By: Willys Jeep Parts Tech on Dec 26 2017 5:52 AM
Questions: Is the kit number 916646 the proper one for the rear end of front spring on a 1955 CJ5?
Question By: Jerry on Nov 4 2012 12:00 AM
Yes this is the proper shackle for your CJ-5
Answer By: Willys Tech on Nov 5 2012 12:00 AM
Questions: I just ordered and received leaf springs from you, the hole looks bigger where the bushing goes than my original leaf springs I'm replacing do I use the stock bushing you have?
Question By: Steve on Mar 18 2012 12:00 AM
You have to make sure to press out all bushing in the leaf springs we send you and everything will work out perfectly for you. Please call us toll free if you have any questions.
Answer By: Willys Tech on Mar 19 2012 12:00 AM
Questions: Will this fit without the rubber and metal fitting in the leaf spring opening and frame bracket opening? Or do I need those in addition to this shackle? I removed the rubber and metal fittings from the frame and springs trying to get the wrong shackle to fit.
Question By: Ian on Dec 11 2011 12:00 AM
This is a complete shackle. You dont need any other bushings other than what comes with this.
Answer By: Willys Tech on Dec 12 2011 12:00 AM