Lock-Right Performance Locker Kit
Fits 46-49 Jeep with Dana 41

More Views

Lock-Right Performance Locker Kit
Fits 46-49 Jeep with Dana 41
New Lock-RIght Performance Locker Kit.

The POWERTRAX LOCK-RIGHT Locker is the original locking differential that could be easily installed in existing case assemblies without any special tools or setup equipment. It has been widely used in demanding off-road applications around the world requiring extreme traction output and high-strength.

Dana 41 rear

46-49 CJ-2A

When operating off-road, the LOCK-RIGHT will always send the engine power to the wheels that need it most. For example, if you are rock crawling and one wheel is in the air (complete loss of traction), the wheel on the ground will receive the engine power and keep you going. Whether it be snow, sand, mud, ice, etc... the LOCK-RIGHT will give you the traction you need.
Item # Price

Product Videos

Questions & Answers

Sort By: 


Questions: i have a stock front end in my 47 2a do they make a locker for it
Question By: MARK JOHNSON on Jan 20 2021 8:05 PM
LR2115 is the part number on our site.
Answer By: Willys Jeep Parts Tech on Jan 20 2021 12:07 PM
Questions: Are D41 and D44 kits interchangable? I.E. will a 44 kit fit a 41?
Question By: Sean Norris on Aug 6 2020 2:49 PM
They are not interchangeable.
Answer By: Willys Jeep Parts Tech on Aug 6 2020 12:27 PM
Questions: What is the maximum speed you could go without dying with these equipped?
Question By: Adam on Nov 30 2016 4:00 AM
Willys in general have a max speed of under 55 mph safely. Really I never go above 45 mph myself. A lot of it has to do how you drive in general as well. Defensive driving is best.
Answer By: Willys Jeep parts Tech on Nov 30 2016 5:40 AM
Questions: Will this cause any issues with flat towing?
Question By: Dave on Sep 24 2014 12:00 AM
No it shouldnt. But you always want to remove your driveshafts if towing and keep it below 45 miles per hour.
Answer By: Willys Tech on Sep 24 2014 12:00 AM
Questions: Can a locker be installed in a Dana 41 without removing the carrier?
Question By: Jim on Aug 7 2012 12:00 AM
Yes I believe they can be but will have to check.
Answer By: Willys Tech on Aug 7 2012 12:00 AM
Questions: How can I tell if I have a dana 41 or 44 in a 1946 cj2a?
Question By: Anonymous on May 5 2012 12:00 AM
Its probably a Dana 41 if you have a CJ-2A. If you get us the ring or pinion numbers I can cross them for you and tell you for sure.
Answer By: Willys Tech on May 7 2012 12:00 AM