Questions & Answers
Questions: I have a Carter YF 932SA carb fitted to the F134 motor in my recently purchased 1950 Station wagon. I have no idea whether this is the correct carb and the previous owner had made a real mess of the needle and seat (it was soldered together) so I have put together something that should be workable from parts I can get locally (South Africa) I now need to set the float level. The instructions on your site state a 5/16 inch (7.9 mm) float level clearance for the YF carb fitted to the CJ6. Should I use the same float level setting or do you have another number for me ? The wagon runs OK on open throttle but floods periodically and runs out of power on pull off.
Question By: Tony on Oct 14 2020 4:51 PM
The YF should be the same setting but I will need to see if we can confirm.
Answer By: Willys Jeep Parts Tech on Oct 14 2020 10:00 AM
Questions: what I should I use to seal around/ seal up the paper gaskets in this kit? perhaps rtv or Indian head sealant ?
Question By: brian on Jan 28 2020 3:45 PM
A thin layer of rtv.
Answer By: Willys Jeep Parts Tech on Jan 28 2020 8:45 AM
Questions: is this kit compatable with a YF-944
Question By: billy on Jan 19 2020 11:31 PM
This kit works with most YF Carter but I will confirm.
Answer By: Willys Jeep Parts Tech on Jan 20 2020 6:16 AM
Questions: Does the master carb kit for the YF have all parts and gaskets that the regular one has as well as linkage parts or does a person need both kits to get all parts? How much do you charge to rebuild carb?
Question By: Joey on Nov 1 2017 1:04 AM
This kit has all the parts as the standard kit plus additional linkage. We can also rebuild your Carter for $299.00.
Answer By: Willys Jeep Parts Tech on Nov 1 2017 5:45 AM
Questions: Does a float come with this kit (item # 924160-MK)?
Question By: Mike on Sep 8 2016 3:11 PM
779966 is the part number for the float.
Answer By: Willys Jeep Parts Tech on Sep 8 2016 8:52 AM
Questions: I received a carburetor rebuild kit #924160-MK I'm wondering why there weren't any directions included with the kit.
Question By: Mark Tinant on May 30 2016 3:47 PM
Please email email@example.com we can send you over instructions. Thanks!
Answer By: Willys Tech on May 31 2016 5:48 AM
Questions: Does this kit include the accelerator pump check ball if not do you have a kit with one or one sold separately
Question By: Steven on Nov 23 2014 12:00 AM
Yes I do believe the check ball is included and shown in the photo.
Answer By: Willys Tech on Nov 24 2014 12:00 AM
Questions: My carb is leaking out of the bottom butterfly..does this kit have what i need?
Question By: jeff on Apr 16 2014 12:00 AM
You may have an issue that needs to be bushed on the butterfly shaft and that would require a professional rebuild by us. This kit however will handle pretty much any other issue.
Answer By: Willys Tech on Apr 17 2014 12:00 AM
Questions: Is the accelorator pump for the carter yf 938 available by it self
Question By: Greg on May 8 2013 12:00 AM
Sorry, we can only get these in complete kit.
Answer By: Willys Tech on May 9 2013 12:00 AM
Questions: On all the instructions I have found online none make much refrence to cleaning the carb prior to rebuilding.I could use the carb and choke cleansr spray that is sold over the counter that is a mix of accetone, toule and something else or I could put them in my handy parts washer and use a soft brush.I think the latter would be preferable but thought it best to ask a pro
Question By: Barb on Jul 17 2012 12:00 AM
It really depends on the condition of your carburetor. Some require more cleaning some less. The big thing is that they are free of deposits, rust, ect. A soft brush never hurt with cleaning fluid.
Answer By: Willys Tech on Jul 18 2012 12:00 AM
Questions: Wondering if this kit..like i think it shows in the picture...has new jets and other small parts as opposed to the other kits that just have gaskets and the accel pump?!
Question By: sean on Mar 5 2012 12:00 AM
Yes that is correct.
Answer By: Willys Tech on Mar 6 2012 12:00 AM
Questions: I recently bought a really nice 1969 CJ5 with the 225 dauntless V6 ,I'm trying to keep her stock but she doesn't have the original OEM Carburetor. Can anyone tell me what the OEM Carb. (Model & #) is for this motor? I did get the OEM Oil Bath Air Cleaner when I bought the Jeep. Thanks!! .Steve
Question By: Steve on Oct 22 2011 12:00 AM
Please call us toll free. We can rebuild yours or we can get a good used one for you.
Answer By: Willys Tech on Oct 24 2011 12:00 AM
Questions: Do you have a source for the accelerator pump springs only. And brass float.
Question By: Glen on Apr 28 2011 12:00 AM
We can possibly get good used. Please call us toll free. Im more than happy to help.
Answer By: Willys Tech on Apr 29 2011 12:00 AM
Questions: Do you re-build or exchange carbs?
Question By: Ken Drill on May 19 2016 3:33 PM
We can do either. We can rebuild yours or when we get your core in and confirm its good. We can swap our for another rebuilt one.
Answer By: Willys Tech on May 19 2016 9:25 AM