Questions & Answers
Questions: I have a 1952 M38. Does the long exhaust pipe require any modifications? Does it need to be cut and shortened for the M38?
Question By: mark barton on Nov 3 2020 6:52 PM
No, it does not. They are the same.
Answer By: Willys Jeep Parts Tech on Nov 3 2020 12:09 PM
Questions: It appears that all pieces have flanges and gaskets. Does this exhaust set require welding?
Question By: Thomas Billings on Jun 3 2020 3:37 AM
They were not originally.
Answer By: Willys Jeep Parts Tech on Jun 3 2020 5:48 AM
Questions: The green paint that comes on it, since it doesnt match the Jeep I want to repaint. Two questions: 1) will this manufacturer's paint burn off, and 2) can I just wet sand and high heat primer/ paint right over top without any issues? Thanks!
Question By: Rick Moxley on Apr 17 2020 1:54 PM
I wouldn't think you would have any problems. I would just sand and clean it prior to painting.
Answer By: Willys Jeep Parts Tech on Apr 17 2020 9:23 AM
Questions: Does this work for the m38a1 with the PTO winch? I can't seem to get it to fit.
Question By: Jordan Stevenson on Jun 29 2017 7:51 PM
If you have a rear driveshaft at the access cover on your D18 transfer case then you would have to modify the long pip for sure to work.
Answer By: Willys Jeep Parts Tech on Jun 30 2017 5:54 AM
Questions: I would like to know how much the shipping will be to PR 00682.
Question By: RAFAEL RUIZ on Nov 24 2016 4:15 AM
Please email firstname.lastname@example.org your full shipping address and we can quote you out. Thanks!
Answer By: Willys Jeep Parts Tech on Nov 28 2016 5:24 AM
Questions: Does this kit include the required hangers and hardware?
Question By: David Dahlstrom on Aug 31 2016 11:42 PM
Part numbers: 2A0402 or 641874 for the clamp and hangers.
Answer By: Willys Jeep Parts Tech on Sep 1 2016 6:12 AM
Questions: Hello, I would like to know how much does the shipping cost to Switzerland for a complete exhaust kit for M38A1. Thank you
Question By: Constantin Arnaud on Jul 3 2016 3:10 PM
Please email email@example.com your full shipping address and we can quote you out. Thanks!
Answer By: Willys Jeep Parts Tech on Jul 5 2016 5:18 AM
Questions: Mike, my exhaust system has been hammered down to go around the clutch/brake pivot rod end. Will this new system fit without the hammering down?
Question By: james brabble on Jun 24 2016 1:00 AM
Sounds like you have an unoriginal system in your vehicle. Yes this will fit without having to do that.
Answer By: Willys Jeep Parts Tech on Jun 24 2016 5:45 AM
Questions: Does the complete kit come with item #805780?
Question By: Anonymous on Jan 29 2015 12:00 AM
No, 805780 is a separate item.
Answer By: Willys Tech on Jan 30 2015 12:00 AM
Questions: Hello, I would like to know the weight and dimensions of the complete exhaust system for a m38a1, to calculate the cost of shiping. Thanks
Question By: Guido on Aug 24 2012 12:00 AM
It comes in two packages. The long pipe is approx 7 pounds and goes in a box 60x6x6. the other parts weigh approx 16 pounds and go in a 24x12x12 box. We can ship this in the US for just $15.00
Answer By: Willys Tech on Aug 27 2012 12:00 AM
Questions: Hi Mike: How much is the cost for shipping the complete kit to Medellin Colombia? thanks you, Antonio
Question By: Antonio on May 12 2012 12:00 AM
Please email: firstname.lastname@example.org your full shipping address adn we can quote you out.
Answer By: Willys Tech on May 14 2012 12:00 AM