Questions & Answers
Questions: My CJ3B has a cable just below the clutch release cable with a ball end attached to a forked fitting on the transmission crossmember and a threaded end going forward that is hanging loose. Is this an engine stay cable and what does the threaded end attach to?
Question By: James Puckett on Mar 31 2021 12:07 AM
Sounds like a stay cable but that is usually on opposite side of engine. Prob your hand brake cable. Please email firstname.lastname@example.org
Answer By: Willys Jeep Parts Tech on Mar 31 2021 6:43 AM
Questions: I have heard that these were used on the T86-AA and V6 combination on CJ5s in 1966 and 1967. Will this one fit between the mount on the cross member and the bellhousing? My OEM crossmember has the post for the ball.
Question By: Grant Kaye on Jul 10 2020 1:45 PM
These really would be specific to the CJ-2A only.
Answer By: Willys Jeep Parts Tech on Jul 10 2020 8:24 AM
Questions: Is the engine stay cable ised on a 1948 cj2a? If so where is it located on the motor. I can't find where.
Question By: David Filipiak on Mar 29 2020 2:08 AM
Yes, you should have a spot for it on the lower passenger side and a slot on your cross member.
Answer By: Willys Jeep Parts Tech on Mar 30 2020 5:44 AM
Questions: Does this cable fit the 1951 cj3a as well? (L134 engine)
Question By: Leeman Daw on Oct 22 2017 9:00 PM
They really didint use this on your CJ-3A but length wise i would think its the same.
Answer By: Willys Jeep Parts Tech on Oct 23 2017 5:54 AM
Questions: what is the purpose of this cable?
Question By: Klasie Breytenbach on Nov 13 2016 8:14 AM
These were to really tie together the drivetrain in hard use.
Answer By: WIllys Jeep Parts Tech on Nov 14 2016 5:54 AM