Save 15% Off Body. Enter BODY15 Excludes body tubs & tub kits.

FREE SHIPPING on all orders $98+ See Details

Select Your Currency
Close
  • Africa
  • Americas
  • Asia
  • Europe
  • Oceania
Shop Kaiser Willys

New Replacement Fuel Pump (with primer handle)
Fits 41-71 Jeep & Willys with 4-134 engine

Part # 119240

New Replacement Single Action Fuel Pump with Primer Handle

These new fuel pumps have the primer handle included. A great addition if your vehicles is cold starting. Helps primer the fuel pump/carburetor and is ready to go for modern day fuel.

Application:
4-134 engine

Fits:
41-45 MB
41-45 GPW
46-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
55-71 CJ-5
46-53 Truck
46-53 Station Wagon
48-51 Jeepster

Part # Price
119240

$92.49

MSRP:

$92.49

MSRP:

1 Item has been added to your cart!
Close

Product Videos

Questions & Answers

Please Wait...

Ask Question Add Answer

All questions will be displayed after moderation. All answers will be displayed after moderation.

My fuel pump on my 1950 CJ3A was not pumping. I pulled it off and found the lever arm broken off. Have you seen this? and what the cause may be?

Willys Jeep Parts Tech:
Tough to say on your old fuel pump. Probably just developed a defect thru the years.

Bought this for my 49 willys truck L134 and How many times do you generally pump it to get fuel up to it?

Willys Jeep Parts Tech:
I would pump 2-3 times typically but just enough to get fuel flowing.

have a 1948 CJ2. have been running 91 octane gas in it. is this ok or should I use 85-87 octane gas

Willys Jeep Parts Tech:
There is no need to. Just run 87 non ethanol.

Is there a glass bowl version of this fuel pump (or any with a priming handle) or can you add the glass bowl that you sell to this one?

Willys Jeep Parts Tech:
119238 is a glass bowl version less primer handle.

It is hard to tell from the photos but does this fuel pump have a see through glass sight bowl or is it a metal bowl on it?

Willys Jeep Parts Tech:
These are metal bowl.

I have a 1950 willys truck with a 6 cylinder engine, will this work?

Willys Jeep Parts Tech:
Email us more engine information and we can help. A Willys Truck in 1950 with a 6 cylinder is unusual.

Does the primer lever stay up or down when in normal operation.

Willys Jeep Parts Tech:
I'll check one but I think down.

I have a 47 CJ2A with the L134. It has a Carter fuel pump like your #119239 pump. Can I replace it with a #119240 primer lever pump?

Willys Jeep Parts Tech:
Yes, that will work just fine. All for for the 4-134 engine.

Looking to add #8126312 as well. Which fittings and respective house adapters would be appropriate for this fuel pump?

Willys Jeep Parts Tech:
A215 is for the fuel pump.

Can this pump be used on an M38, and if so, would I use the MSOO202 gas line kit?

Willys Jeep Parts Tech:
It would fit. Depends on your carburetor. Please email mike@kaiserwillys.com

Do the primer handle type pumps come with glass bowls

Willys Jeep Parts Tech:
Yes, that is correct.

Can a dashboard mounted cable be added to activate the primer without raising the hood to pump the primer level?

Willys Jeep Parts Tech:
Im sure anything is possible but a cable may have trouble due to pressure required to move arm.

Does the glass bowl mount up or down?

Willys Tech:
Up, the main thing is that you put the lever against the camshaft correctly. It will only go one way.

I'm running a 1948 CJ-2A L-134 Is the 1/4" thick steel spacer required to be used between this fuel pump and the engine block? I do believe that I see two gaskets in the one picture so that leads me to believe that a spacer may be needed here.

Willys Jeep Parts Tech:
866236 is recommend for your fuel pump.

I have a solex on my F134, do I need a fuel pressure regulator with this pump

Willys Jeep Parts Tech:
Just double check your pressure. You should be between 1.5 and 4.5 pounds.

Is there a rebuild kit for this type of fuel pump?

Willys Jeep Parts Tech:
Here is the number for the single action fuel pump kit - #A9293. It will work for this fuel pump. Thanks

So this will not fit a 51 M38?

Willys Jeep Parts Tech:
Yes, it will but the M38 used a dual action pump so you will have to replum your lines. You may have to rotate the diaphragm for clearance as well.

can it be shipped to pakistan

Willys Jeep Parts Tech:
We ship daily USPS international priority.

Whats the difference between double and single. My jeep has double with vaccum system for wipers. will this product will work for me too

Willys Jeep Parts Tech:
This is for fuel only. The dual actions have vacuum ports as well. Single action do not.

Do you also carry theses cushions for the front lower seat

Willys Jeep Parts Tech:
2A2301-2NPOD is the part number and we have a lot of options.

our 1960 cj5 the fuel pump also has oil line to upper rockers and valves will this fuel pump be ok

Willys Jeep Parts Tech:
This doesn't have anything to do with the oil return line. This is a fuel pump.

my question is MY L134 IS VERY COLD NATURED AND IT DOES NOT WANT TO RUN without the choke pulled out even has warmed up and I still get a hesation I have aelectric fuel pump and a solidex carb . what I would like to know is if Iput a regular fuel pump on it and a new carb wil this make it perform better

Willys Jeep Parts Tech:
Yes, I would say so. Also at start make sure to pump the pedal to get fuel flow going but not enough to flood.

do I need spacer plate when replacing org. fuel pump with pump number 119240 single action with primer handle

Willys Jeep Parts Tech:
They did originally have a spacer plate.

1946 cj2a restored: How much gas should be in the sight bowl when running.

Willys Jeep Parts Tech:
Typically there is only a small amount at the bottom typically.

Does it hurt to run unleaded fuel in my stock Willys with no additives

WIllys Tech:
I would recommend non-ethanol 87 is just fine.

Will this pump work on a 1957 CJ5 with a F-134? And is the spacer required?

Willys Tech:
Yes this will work, but you may have to rotate the diapram. The spacer is recommended.

What hoses are required to hook this up to tank and carb? 47 cj2a carter one barrel

Willys Tech:
MS01200 is the part number you'll need for the CJ-2A.

How does the primer handle work on this pump. What does the primer handle attatch to?

Willys Tech:
You just pump it to prime it by hand. The handle is attached to the pump itself.
Request Catalog
X
THANK YOU! Your catalog request has been submitted successfully. Please note:

If your catalog does not arrive within 7-10 business days, call us Toll-Free at (888) 648-4923.

Email Subscription
X
THANK YOU! You have successfully subscribed to our newsletter.
Contact Form
X
THANK YOU! Your contact form request has been submitted successfully.
Photo Contest
X
SUCCESS! Your photo contest entry has been submitted!
Browser warning
The browser you are using to visit our website is no longer supported. For the best browsing experience, please visit us using a different browser.
I understand, close this message