Questions & Answers
Questions: Is it possible to fit an MB grill on a 1951 Willys M38. I have heard it can be done but new brackets will need to be welded in place. And the hinges from the M38 grill will need to be grinded off. Worst cast the radiator shroud may need to be changed?? I know this sounds like a lot of effort but I love the 9 slat grill.
Question By: Gary Riley on Sep 20 2021 3:47 PM
Can you email mike@Kaiserwillys.com to help out on. If you can too email us pictures of what all you have there too so we can see.
Answer By: Willys Jeep Parts Tech on Sep 20 2021 10:58 AM
Questions: does willy's have seven or nine slat front grill?
Question By: PATRICK O'NEILL on Feb 22 2020 4:13 PM
Depends on the vehicle. Please email firstname.lastname@example.org your vehicle information and I can help.
Answer By: Willys Jeep Parts Tech on Feb 24 2020 9:52 AM
Questions: Are the dimensions of this 9-slat grill similar enough to put it into a 7-slat cj2a without major modification? I know the lights would have to be modified but I like the older 9-slats and want to install it into a CJ to make an MB clone.
Question By: Daniel Roiger on Oct 5 2018 12:06 AM
Yes, it should work because the same hood and fenders bolt up.
Answer By: Willys Jeep Parts Tech on Oct 5 2018 5:49 AM
Questions: Do you have any pictures of the back of the grill? Am trying to determine if everything is on mine.
Question By: Stephen Weyh on Feb 9 2018 11:42 AM
Please email email@example.com and we can get you some. Thanks!
Answer By: Willys Jeep Parts Tech on Feb 9 2018 5:37 AM
Questions: my lights are to high on the grill ? jeep is a 1943 gpw HELP
Question By: scott on Jun 2 2017 10:58 PM
Not sure I understand question. Please call us toll free and we can try to help.
Answer By: Willys Jeep Parts Tech on Jun 5 2017 5:37 AM
Questions: how can I know which grill is the correct for my willys proyect. I bought it whith out the grill. It is a willys round tube cross member in front and serial number 195613. Thank you very much
Question By: JUAN DIEGO FERRARO on Aug 23 2016 1:09 AM
Please email mike@Kaiserwillys.com some pictures and we can help out ID your Willys.
Answer By: Willys Jeep Parts Tech on Aug 23 2016 5:51 AM
Questions: do i have to weld it in
Question By: charlie on Oct 10 2014 12:00 AM
No, the grille's were originally bolted in.
Answer By: Willys Tech on Oct 10 2014 12:00 AM
Questions: which is the weight of the grill, because I need to take by plane to another part, and I know the weight to calculate the cost of moving.
Question By: Steve on Jan 1 1970 12:00 AM
It weights approx 25 pounds.
Answer By: Willys Tech on Jul 15 2014 12:00 AM
Questions: hi im from ecuador i need to know which is the weight of the grill and what is the cost of shipping to Ecuador
Question By: David on May 8 2014 12:00 AM
Please email firstname.lastname@example.org your full shipping address and part numbers you need and we can quote you out.
Answer By: Willys Tech on May 12 2014 12:00 AM
Questions: What additional parts will be needed to put this grille on a 47 CJ2A? I see head light buckets. As I recall the MB headlights were quite a bit different, mounted slightly abaft of the grille and could be flipped around to shine into the engine compartment. Do you sell these as well or is there another source you could put me on to for these?
Question By: John Landrum on Jan 19 2012 12:00 AM
We do have the buckets, brackets and blackout lights all available. We ahve it all. Please call us toll free. We are more than happy to convert you over.
Answer By: Willys Tech on Jan 19 2012 12:00 AM
Questions: Will this fit a '48 CJ2A as well? I saw it will fit the '46.
Question By: Tony on Jan 4 2012 12:00 AM
Yes it will work for the CJ-2A as well too.
Answer By: Willys Tech on Jan 4 2012 12:00 AM