Questions & Answers
Questions: I need an oil line longer than 20" for a '43 Willys. Will this fit?
Question By: Mike Daly on Aug 29 2020 2:51 PM
Please send us some photo of what you have. They were originally 22 and 10" long.
Answer By: Willys Jeep Parts Tech on Aug 31 2020 5:43 AM
Questions: you said that this hose connects in front of the fuel pump low on the galley. The fuel pump is about as far forward as it can be, tight up against the engine mount bracket. the only port I see near the area is under the pump, not sure if the hose will reach it or if it is the right size? what am I missing. is there a photo / diagram I can look at?
Question By: Dennis Flowers on Apr 11 2020 2:43 AM
You can email firstname.lastname@example.org and we can send some photos of motor over to you. Thanks!
Answer By: Willys Jeep Parts Tech on Apr 13 2020 6:48 AM
Questions: I purchased part # 648865, steel oil pressure line, Where does it go?
Question By: Dennis Flowers on Apr 9 2020 3:45 AM
Rear corner on the drivers side of the block. From the lower galley on up to the top as a return.
Answer By: Willys Jeep Parts Tech on Apr 9 2020 5:53 AM
Questions: where does the hose connect on the engine end
Question By: Dennis Flowers on Apr 9 2020 3:31 AM
Just forward of the fuel pump on the lower galley.
Answer By: Willys Jeep Parts Tech on Apr 9 2020 5:52 AM