Questions & Answers
Questions: What is the purpose of the small round hole and slit near the bottom of the tube? Should these face up or down?
Question By: Gerry on Nov 9 2022 1:08 AM
That is for your horn contact A302 at the base.
Answer By: Willys Jeep Parts Tech on Nov 9 2022 5:29 AM
Questions: ive got an upgrade Saginaw power steering box with an interment shaft like a c-j5.can i get a steering shaft 3/4 36 splinted on each end and fit this cover with a m38 a-1steering wheel and horn button..Or would you go with a new tilt column
Question By: gene on Oct 11 2021 7:09 PM
Send us some photos of what all you have there and we can go from there. Thanks!
Answer By: Willys Jeep Parts Tech on Oct 12 2021 5:44 AM
Questions: Is this the same tube used on the 1973 CJ5 with manual steering? It seems to be only a little longer.
Question By: Robert Napientek on Feb 17 2021 5:10 PM
I have not tried to mount it in that later model.
Answer By: Willys Jeep Parts Tech on Feb 17 2021 9:38 AM
Questions: Would this tube fit a 1949 Willys Truck?
Question By: Carter Ashley on Nov 10 2020 4:34 AM
That is used only. Please email firstname.lastname@example.org to help.
Answer By: Willys Jeep Parts Tech on Nov 10 2020 5:44 AM
Questions: does this go right over the steering worm? and will this fit a 1969 cj5
Question By: Colby C on Aug 4 2018 4:04 AM
Yes, this slides over the outside.
Answer By: Willys Jeep Parts Tech on Aug 6 2018 5:40 AM
Questions: Do you have the grommet that goes around the base of this tube? It covers the hole in the floor around the tube/steering column at the point where it passes through the floor.
Question By: Todd on Jun 3 2016 3:46 AM
Search for 'column grommet' and it will come right up and choose the one that fits your Willys.
Answer By: Willys Tech on Jun 3 2016 5:58 AM
Questions: Does the upper steering column bearing come with tube Part #639190?
Question By: Tom on Jan 8 2014 12:00 AM
That is a separate item.
Answer By: Willys Tech on Jan 8 2014 12:00 AM
Questions: does it come with the hole for the horn bushing contact?
Question By: dave anderson on Aug 17 2013 12:00 AM
Later vehicles did not use this. If you have the early styel that goes out above the gear box then you just need to dill it in.
Answer By: Willys Tech on Aug 18 2013 12:00 AM
Questions: will this one fit 1967 cj6
Question By: matt on Jul 26 2013 12:00 AM
Yes they are the same thru 71.
Answer By: Willys Tech on Jul 26 2013 12:00 AM
Questions: what is the length of the outer steering tube?
Question By: Anonymous on Mar 15 2013 12:00 AM
34.5 just like original.
Answer By: Willys Tech on Mar 18 2013 12:00 AM
Questions: Do you carry just the bearing that goes into the top of this tube with the snap ring ?
Question By: John on Apr 16 2012 12:00 AM
The bearing is part number: 801422
Answer By: Willys Tech on Apr 16 2012 12:00 AM
Questions: Do you remove the old one first or does this one slide over the existing one?
Question By: michael on Jan 18 2012 12:00 AM
This replaces the original one.
Answer By: Willys Tech on Jan 18 2012 12:00 AM
Questions: What is the diameter of this column?
Question By: David on Oct 26 2011 12:00 AM
It is approx 1-1/2 just like original.
Answer By: Willys Tech on Oct 27 2011 12:00 AM