Product Videos
Questions & Answers
Sort By:
Questions: Hi. I have a 1966 cj5 with power steering. Will this go from knuckle to knuckle ? This looks like the one on my jeep. But I measured to tube and it is a little over 35inchs. Wich goes knuckle to knuckle. Then another tie rod that goes from the hole in the tie rod end on the right side to the hole in the pitman arm. That tube measures around 22inchs. Can you help me?
Question By: Chase on Feb 13 2022 2:33 AM
No, this is for original steering only. Send us a picture of your steering so we can see it.
Answer By: Willys Jeep Parts Tech on Feb 14 2022 7:24 AM
Questions: Are the ball joints included/installed in tie rods? If so, what make? Thanks.
Question By: Richard on Feb 4 2022 6:32 PM
Yes, the ends are complete.
Answer By: Willys Jeep Parts Tech on Feb 7 2022 5:53 AM
Questions: I have a 48 Jeep willys 4 wheel drive with a Dana front end front axle I need the tie rod tube assemblies what part number is that for left and right
Question By: Jacob on Dec 3 2021 2:11 AM
642058
642059
Answer By: Willys Jeep Parts Tech on Dec 6 2021 5:52 AM
Questions: Does this come with the dust boots or do those need to be ordered separately?
Question By: William Earnhardt on Apr 30 2021 5:46 PM
Yes, they are included.
Answer By: Willys Jeep Parts Tech on Apr 30 2021 10:54 AM
Questions: Do you know if these parts will fit a left hand drive Mitsubishi Jeep J26.
Thanks
Question By: Michael Mroczyk on Apr 2 2020 10:11 PM
Sorry, that I am not sure on.
Answer By: Willys Jeep Parts Tech on Apr 3 2020 5:52 AM
Questions: Hi I am in Australia, will this fit a right hand drive cj3b
Question By: Sean Neate on Nov 20 2018 8:55 AM
Sorry, i do believe the RH vehicles are different.
Answer By: Willys Jeep Parts Tech on Nov 20 2018 1:52 PM
Questions: Will this fit on 67 Jeep commando?
Question By: Jerry Mercer on Oct 21 2018 5:23 PM
This kit will not work because the tie rods themselves will not fit the Commando but the tie rod ends will. Thanks
Answer By: Willys Jeep Parts Tech on Oct 21 2018 11:40 AM
Questions: I have a 70 -71 cj5 and am having trouble finding this tie rod end assembly that fits my steering. Total lengh that I need is roughty 41 3/4" from tie rod to tie rod.
Question By: Darrin m DiBernardo on May 14 2018 1:17 PM
Sounds like you may have something unoriginal. can you email mike@kaiserwillys.com your set up and i'll take a look.
Answer By: Willys Jeep Parts Tech on May 14 2018 9:28 AM
Questions: Good morning, Mike
What is the length of this assembly, please ?
Pete
Question By: PETE LENCIONI on Mar 5 2018 6:23 PM
It is adjustable on each end. The tube is 18-3/4" like original.
Answer By: Willys Jeep Parts Tech on Mar 6 2018 5:44 AM
Questions: Hi I am restoring a 1967 jeep cj5, no power steering, and the play in my steering wheel is terrible were should i start i haven't tore into the problem yet. I can turn the wheel about three inches before tire movement.
Question By: Ryan on Dec 15 2017 8:40 PM
You will want to rebuild the steering gear box and check out your bellcrank as well. Please call us toll free and we can go over. Thanks!
Answer By: Willys Jeep Parts Tech on Dec 18 2017 5:58 AM
Questions: will this fit a 1969 cj5 with the dauntless v6?
Question By: Anonymous on Nov 11 2013 12:00 AM
Yes they are all the same thru 1971
Answer By: Willys Tech on Nov 11 2013 12:00 AM
Questions: can i get just the tierod end with the hole in it?
Question By: jim on Apr 30 2013 12:00 AM
Its part number: 640178
Answer By: Willys Tech on Apr 30 2013 12:00 AM
Questions: Will this fit '52 m38?
Question By: Anonymous on Jul 1 2012 12:00 AM
Yes it will work just fine.
Answer By: Willys Tech on Jul 2 2012 12:00 AM
Questions: You have steering components listed up to 66 cj5. I have a 67 that needs all tie rods and tie rod ends. will they 66 fit on the 67 ? they all look the same
Question By: John on Jan 30 2012 12:00 AM
Yes they are all the same.
Answer By: Willys Tech on Jan 30 2012 12:00 AM
Questions: The question was answered as to whether the tie rod ends are greasable but do they have grease zerks? It seems that one would follow from the other but one never knows......
Question By: John on Jul 25 2011 12:00 AM
Yes they come complete.
Answer By: Willys Tech on Jul 25 2011 12:00 AM
Questions: Will this fit a '68 axle?
Question By: Anonymous on Apr 6 2011 12:00 AM
Yes, this should be just fine.
Answer By: Willys Tech on Apr 7 2011 12:00 AM
Questions: The tie rod ends displayed in this picture do not appear to have grease zerks in them, are these graseable? Thanks.
Question By: Terry on Mar 19 2011 12:00 AM
Yes, these are greasable.
Answer By: Willys Tech on Mar 21 2011 12:00 AM
Weekly Willys highlights and discounts sent to your inbox
