Questions & Answers
Questions: Can you provide the diameter, depth and distance between mounting studs?
Question By: Wayne Price on Jun 2 2020 5:08 PM
2" center on center on studs. Not sure which exact measurements your looking for on the other. Please email firstname.lastname@example.org
Answer By: Willys Jeep Parts Tech on Jun 2 2020 10:49 AM
Questions: Hi, My ‘48 CJ2a is wired for turn signals and I need to replace driver’s side rear tail light assembly. Will my turn signals work with this light? Thanks Steve
Question By: Steve Phalen on May 24 2019 11:39 AM
Yes, you can use a dual filament bulb with these.
Answer By: Willys Jeep Parts Tech on May 28 2019 5:42 AM
Questions: Can these be use for a M38a1?
Question By: Brandon on Oct 6 2018 5:58 AM
I'm sure you could make these work. The first thing to know is that these assemblies are not for the 24 volt system. The other thing you may have to modify the back panel to mount them. Thanks
Answer By: Willys Jeep Parts Tech on Oct 8 2018 6:21 AM
Questions: What triggers the difference between running lights and brake lights? Does the brake cylinder switch handle both features using one wire? And at the taillight, is the other wire for future turn signal with ground provided by chassis ground? Thanks
Question By: Gordon Brown on Aug 31 2018 2:32 AM
Your headlight control switch will control this. Yes, it is grounded via the frame.
Answer By: Willys Jeep Parts Tech on Aug 31 2018 5:57 AM
Questions: To be used as a turn signal as well as a tail and stop light, does this require a new socket, or only a duel filament bulb?
Question By: Rodrigo Muñoz on Apr 30 2018 5:25 PM
You'll only have to change out the bulbs to dual filament bulbs. Thanks
Answer By: Willys Jeep Parts Tech on Apr 30 2018 10:48 AM
Questions: I have part number 647801 brake light switch but when i am running lights i do not have brake lights but i do have blinkers
Question By: Javier Balderas on Feb 5 2018 9:01 PM
Please call us toll free. Ask for me Mike M. I can try to help.
Answer By: Willys Jeep Parts Tech on Feb 5 2018 1:02 PM
Questions: All I need is the red lens for the tail light of a 1950 Willys pickup. Do you have just that part? if not, do you have a replacement fixture which might also come with a passenger side tail light as well?
Question By: Ed O'Leary on Nov 2 2017 8:03 PM
No, you do have to buy the whole assembly even though you just need the lens. Thanks
Answer By: Willys Jeep Parts Tech on Nov 3 2017 7:15 AM
Questions: i have a 1947 CJ-2A , does this light assembly mount into the existing hole that the original tail light assembly on the drives side is in? or do i need to make the whole bigger/smaller?
Question By: wil on Jan 1 1970 12:00 AM
Yes this mounts thru the original holes. No drilling required.
Answer By: Willys Tech on Apr 22 2013 12:00 AM
Questions: When I hit the brakes the tail light doesn't work, bulbs, blinkers and directionals work. Is there a part or linkage to the brakes I am missing?
Question By: Anonymous on Aug 5 2012 12:00 AM
You probably need part number: 647801 brake light switch
Answer By: Willys Tech on Aug 6 2012 12:00 AM
Questions: Does this come with the bulb included?
Question By: William R Allen on May 21 2016 1:30 PM
Yes, I do believe they come with a 12 volt bulb that could be swapped if you need 6 volt.
Answer By: Willys Tech on May 23 2016 5:39 AM