Questions & Answers
Questions: Hi, Would this back seat fit in a 1950 Willys.....I have a 36 inch width between the wheel wells. And, does it need to have different holes drilled in the back to make it compatible?
Question By: Ted on Jul 29 2021 4:22 AM
Please email firstname.lastname@example.org what vehicle you have an we can help.
Answer By: Willys Jeep Parts Tech on Jul 29 2021 5:48 AM
Questions: Looking to purchased required hardware to mount rear seat. I found the pivot bracket for the rear, but unable to find where you may have the front strap brackets. Thanks.
Question By: Mark Schoeberl on Apr 24 2021 10:27 AM
Those are part of your rear floor board and welded. Someone must have cut your old ones off.
Answer By: Willys Jeep Parts Tech on Apr 26 2021 5:31 AM
Questions: What part number do I refer to for a 59 cj5 rear seat frame. Thank you
Question By: Chris stein on Dec 17 2019 10:03 PM
Please call us toll free and ask for Mike M or email email@example.com and we can try to help out with your CJ-5.
Answer By: Willys Jeep Parts Tech on Dec 18 2019 5:32 AM
Questions: If you replaced your tub would you have to drill holes for the rear brackets to be installed into the tub? Is there a video available to show how the rear brackets should be installed?
Question By: Will on Apr 2 2019 1:50 AM
The cut outs are there for the REARBRKT part number. You would just need to drill the 2 mounting holes then. The slots for the forward legs are already ready to go in the floor board.
Answer By: Willys Jeep Parts Tech on Apr 2 2019 5:42 AM
Questions: Which seat cushion fits this fram?
Question By: Steve Bayless on Dec 25 2017 3:43 PM
B2301-5 B2301-6 These are the two part numbers above for upper and lower cushion.
Answer By: Willys Jeep Parts Tech on Dec 26 2017 5:49 AM
Questions: Do holes need to be drilled to mount the A2782-2A? Why the studs on the back seat brackets on the bottom of the legs?
Question By: Steve Hodgson on Oct 8 2017 12:44 AM
You really shouldn't ave to drill any holes to mount. You use your original part number: REARBRKT and then the front legs just slot into the recess on the floor board.
Answer By: Willys Jeep Parts Tech on Oct 9 2017 5:53 AM
Questions: I have a 1952 M38 and a 1948 CJ2A, will this seat interchange between both?
Question By: William M DeMoss on Feb 25 2017 11:18 PM
Yes, But I think you may have to drill holes for the drivers seat to mount.
Answer By: Willys Jeep Parts Tech on Feb 27 2017 5:46 AM
Questions: Hi, will this seat frame fit a CJ3a ? Thanks.
Question By: Kagel Smith on Dec 13 2014 12:00 AM
A2782-3A is the part number you want for a CJ-3A. But yes they will interchange.
Answer By: Willys Tech on Dec 15 2014 12:00 AM
Questions: what is the width of the frame
Question By: James on Feb 26 2014 12:00 AM
Appox 32 like original
Answer By: Willys Tech on Feb 26 2014 12:00 AM
Questions: Is there a mountable fender siren for a 1946 willys cj2a?
Question By: Bud on Jan 19 2014 12:00 AM
They never used a siren on the CJ's. That is a tough item to find.
Answer By: Willys Tech on Jan 21 2014 12:00 AM
Questions: What is the full dimensions in inches?
Question By: Anonymous on Jan 7 2014 12:00 AM
Are you asking for box size? or bottom pan? or what exactly? These are just like the original CJ-2A frames, They fit down between the wheel wells in your rear floor pan.
Answer By: Willys Tech on Jan 7 2014 12:00 AM
Questions: Do you have one that the back is folding? Or would I have to modify one to make it so? Thank s,Luc
Question By: Anonymous on Jul 1 2013 12:00 AM
They never were originally folding. You would have to modify to make it do that.
Answer By: Willys Tech on Jul 1 2013 12:00 AM
Questions: This would be a new install for my '48 CJ2A. Does mounting hardware come with this frame? Instructions?
Question By: Anonymous on Jan 1 1970 12:00 AM
I would also order part number: REARBRKT for the seat frame. That will fix you up. It just pops in place. Your rear tail lights if they have a double filament bulb will work for turn signals too.
Answer By: Willys Tech on Jan 2 2013 12:00 AM
Questions: Do you stock a rear seat frame seat belt kit?
Question By: Dale on Jun 23 2011 12:00 AM
I would order qty 2 of part number: BELT-1
Answer By: Willys Tech on Jun 27 2011 12:00 AM
Questions: I have a Willy's station wagon which I think never had a back seat but I was wondering if I did want to put a back seat in which of the models you have would best suit this purpose?
Question By: Natalie Calatayud on Apr 6 2011 12:00 AM
We can get you a good used seat frame for the Station Wagon. Please call us toll free.
Answer By: Willys Tech on Apr 7 2011 12:00 AM
Questions: What are the dimensions of this seat?
Question By: Anonymous on Apr 5 2011 12:00 AM
It sits right in betweeen the wheel wells just like original.
Answer By: Willys Tech on Apr 6 2011 12:00 AM
Questions: I have a '47 cj2a but the seat frame doesn't look like the one pictured here. It has a folding/removable seat back. The seat hangs off the rear fender wells. Could it be off another year jeep? Does it even matter when I decide to order new cushions?
Question By: Grant on Mar 8 2011 12:00 AM
It is off another jeep. This rear seat frame is exactly like the original for a CJ-2A. Please call us toll free.
Answer By: Willys Tech on Mar 8 2011 12:00 AM
Questions: Isn't the cj2a and the cj3a rear seat frames the same?
Question By: Matt on Oct 17 2010 12:00 AM
Originally they were different due to the upper part of the rear frame where your back went.
Answer By: Willys Tech on Oct 18 2010 12:00 AM