Questions & Answers
Questions: What are the measurements for this back seat?
Question By: Christian Haag on Jan 22 2019 11:23 PM
Please email email@example.com and we can take any specific measurements you need.
Answer By: Willys Jeep Parts Tech on Jan 23 2019 6:05 AM
Questions: What hardware to I need to complete the installation of the frame to tub?
Question By: George on May 28 2018 5:59 PM
This diagram really help as it shows what hardware you need and where it all goes: https://www.kaiserwillys.com/diagram/m38-diagrams/body-diagrams-willys-m38/rear-seat-50-52-m38/rear-seat Thanks
Answer By: Willys Jeep Parts Tech on May 29 2018 4:26 AM
Questions: Can this seat be fitted in a cj3a?
Question By: eric m on Mar 28 2017 10:57 PM
I'm sure it could be because the bodies are basically the same but we do offer the proper CJ-3A seat frame new too.
Answer By: Willys Jeep Parts Tech on Mar 29 2017 5:45 AM
Questions: I had read somewhere that you can fit this seat in a CJ2A. Is this true, and if so what else will I need to make it happen (starting with a blank canvas)? Thanks.
Question By: Anonymous on Apr 13 2015 12:00 AM
It will fit inside the wheel wells yes - but I would just use the CJ-2A rear seat frame we sell if you have a CJ-2A.
Answer By: Willys Tech on Apr 14 2015 12:00 AM
Questions: I'm looking for a hard top and doors for my 52 M38. Can y'all get one and how much am I looking at spending?
Question By: matt on May 25 2014 12:00 AM
That is going to be very tough to find. We have complete soft tops or summer tops availble.
Answer By: Willys Tech on May 27 2014 12:00 AM
Questions: I have a 1952 M38a1 and am looking for a rear seat. Do you have one?
Question By: Brent Behrens on Jun 13 2011 12:00 AM
This is the proper one for it as well.
Answer By: Willys Tech on Jun 14 2011 12:00 AM