Questions & Answers
Questions: I lost all compression suddenly on my cj3a. Can the camshaft gear spin on its hub? Nothing seems to be broke inside.
Question By: Dusten Green on Apr 8 2020 7:07 PM
Please email firstname.lastname@example.org and we can help and clarify what you mean.
Answer By: Willys Jeep Parts Tech on Apr 8 2020 12:08 PM
Questions: 1953 CJ-3B. How do I remove the fiber timing gear from the end of the cam shaft?
Question By: Brian Emma on Jul 9 2019 12:30 AM
There is just a key so it should slide off. A puller may be necessary.
Answer By: Willys Jeep Parts Tech on Jul 9 2019 6:55 AM
Questions: Is this a fiber steel or aluminum gear
Question By: Bruce Gardner on Mar 4 2018 6:50 AM
This is a fiber gear. Thanks
Answer By: Willys Jeep Parts Tech on Mar 5 2018 5:21 AM
Questions: What is the bore diameter, the overall diameter, and the thickness? Need all measurements possible
Question By: Landis Nick on Sep 12 2017 5:02 PM
1-1/4" x 6.-1/2" OD
Answer By: Admin on Sep 12 2017 10:34 AM
Questions: What is the best way to pull the old gear off of the camshaft? Do you carry the puller specified in the mechanics manual for it?
Question By: Kristofer Kolstad on Dec 5 2016 4:17 AM
Your local Napa should have a gear puller you can buy.
Answer By: Willys Jeep Parts Tech on Dec 5 2016 5:44 AM
Questions: how many teeth on cam gear
Question By: waltermaldonis on Jun 7 2013 12:00 AM
56 tooth just like original.
Answer By: Willys Tech on Jun 10 2013 12:00 AM
Questions: need to know where the timing marks are on the cam gear?
Question By: jacky on Oct 28 2011 12:00 AM
It is stamped on the gear itself typically with a dot.
Answer By: Willys Tech on Oct 31 2011 12:00 AM