Questions & Answers
Questions: Where are the connecting rods for the 134 engine made?
Question By: Arthur on Feb 10 2021 2:16 AM
Right now we recommend good used on these. Please email firstname.lastname@example.org to help.
Answer By: Willys Jeep Parts Tech on Feb 10 2021 5:45 AM
Questions: Whay I can not put this item in basket. Do you need me to call and make phone order. Miroslav
Question By: Miroslav on Jan 18 2021 9:44 PM
Please email email@example.com and we can help out.
Answer By: Willys Jeep Parts Tech on Jan 19 2021 5:39 AM
Questions: When I pulled my F engine apart, all the oil ports on the connecting rods were facing in the same direction the difference being the lock bolt for the piston pins were facing in different directions. Which way is correct? Also all the vertical slits in the pistons were all in the same direction. (to the right looking at the front of the engine). Is that correct? Thank You.
Question By: Ken on Dec 2 2020 6:48 PM
Email firstname.lastname@example.org and i can help with. I'll scan in some pages out of book too to help as well and email them to you.
Answer By: Willys Jeep Parts Tech on Dec 2 2020 1:18 PM
Questions: How can you tell which rods are 1 and 3 or 2 and 4 on a set of original rods?
Question By: Kyle Thomas on May 4 2018 1:53 AM
The easiest way to tell is by looking at the position of the oil port plug. They are in the opposite positions for the 1,3 then the 2,4. Thanks
Answer By: Willys Jeep Parts Tech on May 4 2018 8:21 AM
Questions: What is the length of a 134 4cyl Jeep connecting rod?
Question By: Beverly A Ross on Sep 13 2017 7:59 PM
11-3/8" overall approx.
Answer By: Willys Jeep Parts Tech on Sep 13 2017 1:05 PM
Questions: Do I need to replace all four for a rebuild or can I just replace the ones that are bad?
Question By: Barney on Jan 7 2013 12:00 AM
I always recomment relacing them in sets for balance.
Answer By: Willys Tech on Jan 7 2013 12:00 AM