Questions & Answers
Questions: Is there a crossmember with the bell crank attach point available? for my 47 CJ2A
Question By: Bill Brisson on Sep 14 2022 12:00 PM
677008 but confirm what bellcrank you have on yours.
Answer By: Willys Jeep Parts Tech on Sep 14 2022 5:33 AM
Questions: I am looking for the cover that goes over the round crossmember
Question By: Gary Stewart on Feb 27 2022 1:10 PM
Not sure exactly what you mean. Email firstname.lastname@example.org to help.
Answer By: Willys Jeep Parts Tech on Feb 28 2022 7:14 AM
Questions: Will this crossmember work on a 1948 cj2a? I Am updating the steering so the bell crank placement is not an issue.
Question By: Jarrod Dericco on Mar 10 2020 12:39 AM
It will fit between the frame rails yes as long as your bellcrank is not a concern.
Answer By: Willys Jeep Parts Tech on Mar 10 2020 5:55 AM
Questions: Just brought home a 1948 CJ2A, no front crossover...does this '46 crossover fit the '48?
Question By: Ron on Feb 10 2020 10:16 PM
They are different between the two but are dimensional the same between the frame rails.
Answer By: Willys Jeep Parts Tech on Feb 11 2020 5:38 AM
Questions: any reason i couldn't cut the bell crank off my old crossmember and weld to this?
Question By: Matthew Branstetter on Oct 2 2017 5:29 PM
Im sure its possible to do.
Answer By: Willys Jeep Parts Tech on Oct 2 2017 11:17 AM
Questions: I have a 1947 CJ2A ser#128000 I need to replace the front crossmember and frame front rails . My bell crank mount is welded to this cross member. The diagram of the crossmember item A1203 does not show the bell crank mount attached to the crossmember. Does the mount come with the crossmember and if so would I have to weld it to the crossmember. If I have to order the bell crank mount separate please reply with the proper mount item #. I appreciate the help
Question By: Dwayne on Aug 28 2017 9:56 PM
That is available used only. Please call us toll free and we can try to help you with your CJ-2A
Answer By: Willys Jeep Parts Tech on Aug 29 2017 5:47 AM
Questions: I have a CJ2A and I need to replace this crossmember. Do you have one with the Bell crank installed or do I have to cut the Bell crank off of my old one.
Question By: Toby Blackmon on Apr 25 2017 11:36 PM
That will have to be cut out of a salvage yard.
Answer By: Willys Jeep Parts Tech on Apr 26 2017 6:06 AM
Questions: Does it matter if its' an early or late model 2a, on the bell crank mounts, and is there a recommended way of installing this part?
Question By: Rich on Jun 30 2014 12:00 AM
This is for early style. I think either can be used however.
Answer By: Willys Tech on Jun 30 2014 12:00 AM
Questions: Does it also have the mount for the bell crank
Question By: Josh on Feb 8 2014 12:00 AM
Yes they will have the mount with it.
Answer By: Willys Tech on Feb 10 2014 12:00 AM