Questions & Answers
Questions: Can you furnish the dimensions of oil filter part #909335A height , width and center hole ? Thanks
Question By: John A Yocum on Sep 14 2022 7:45 PM
4-1/16" tall 3-3/4" wide Paper gasket: OD - 3-7/8" / ID - 3-3/4" Rubber gasket: OD - 4-1/4" / ID - 4-1/8"
Answer By: Willys Jeep Parts Tech on Sep 15 2022 10:51 AM
Questions: Can you explain briefly how the oil circulates thru filter canister? It appears to be different from the canister on my CJ2A. Thanks
Question By: Stan Lee on Dec 17 2019 3:38 AM
You have a small tube in the center of your canister with a pin hole approx 2/3 the way up it. Oil enters into the canister from the top port, thru the filter and is keeps pressure by going thru the pin hole and down thru tube out the outlet at bottom of canister.
Answer By: Willys Jeep Parts Tech on Dec 17 2019 5:36 AM
Questions: I have a 1955 Willys pickup with the 6-226 engine. It appears to have the original canister filter. Is this the correct filter for that engine? Was there only one type filter canister used on the 226 engine? Thanks
Question By: Stan Lee on Dec 17 2019 3:34 AM
Yes, this is the correct filter for your Willys Truck and the type used originally.
Answer By: Willys Jeep Parts Tech on Dec 17 2019 5:38 AM
Questions: Thank you for carrying a replacement oil filter cartridge. What brand of filter would've come from the factory originally? 1957 Willys Pickup 6-226 engine.
Question By: Gene W Folsom on Aug 16 2018 2:31 AM
Originally they were Fram.
Answer By: Willys Jeep Parts Tech on Aug 16 2018 5:53 AM
Questions: What oil and viscosity would you use for an f-head engine. Thank You.
Question By: Ken Utley on Jun 3 2017 3:04 PM
10W-30 is what we use.
Answer By: Willys Jeep Parts Tech on Jun 5 2017 5:41 AM
Questions: I have a 1943 with a later model f-head engine in it. What oil filter do I need? Thank You
Question By: Ken Utley on Jun 3 2017 3:01 PM
If you have a civilian canister then I would use this one. If its a military filter then its part number: 119952
Answer By: Willys Jeep Parts Tech on Jun 5 2017 5:39 AM
Questions: I have a 1958 willys truck. It was swapped with a 1961 283 corvette motor. There is an oil bath canister. Does this filter fit it?
Question By: Mary on Apr 16 2014 12:00 AM
If you have the original Willys oil filter canister then yes this will work.
Answer By: Willys Tech on Apr 17 2014 12:00 AM
Questions: HOW OFTEN DO YOU HAVE TO CHANGE THE OIL FILTER AND DO YOU CHANGE THE CARTRIDGE BY ITSELF OR THE CANISTER TOO?
Question By: Victor on May 18 2012 12:00 AM
I would change the oil every 3000 miles for older motors. Just the filter needs to be changed.
Answer By: Willys Tech on May 18 2012 12:00 AM
Questions: What weight oil did L6-226 use?
Question By: Jeff Edgett on May 1 2016 2:49 PM
We typically use a 10W-30 oil.
Answer By: Willys Tech on May 2 2016 5:58 AM