Product Videos
Questions & Answers
Sort By:
Questions: i just bought a 1950 cj3a and im sure its got the stock 5.38 gears for both the dana 25 and 44 and was wondering if this 4.88 set will work in the dana 44 that i have and of course the matching 4.88 set for the dana 25
Question By: mike Pooler on Jul 8 2019 12:12 AM
If your trying to get more top end - i would highly recommend going to the SATURN overdrive we sell. Email mike@kaiserwillys.com or call us toll free and we can see what we can do on your gearing.
Answer By: Willys Jeep Parts Tech on Jul 8 2019 5:46 AM
Questions: What is the best way to determine the rear gear ratio in my 53 CJ3B....no tag was on the rear.
Thanks
Question By: Bill H on Dec 22 2017 1:43 PM
If you look on the ring or pinion, you should see some numbers. Get those numbers and give us a call toll free at 888-648-4923 and we can set you up. Thanks
Answer By: Willys Jeep Parts Tech on Dec 23 2017 5:33 AM
Questions: where are these manufactured at. ? Are they made of foreign or American steel ?
Question By: ken on Nov 29 2017 1:09 AM
I do believe these are NOS but will confirm.
Answer By: Willys Jeep Parts Tech on Nov 29 2017 5:54 AM
Questions: How do I know what ring and pinion I have . I have the gear exposed but none of the numbers look familiar.
Question By: Tony on Jul 13 2014 12:00 AM
You can email mike@kaiserwillys.com your numbers and we can ID for you. Or just count the number of teeth on the ring and number of teeth on the pinion and divide.
Answer By: Willys Tech on Jul 14 2014 12:00 AM
Questions: Will the 4.88 ring and pinion gear set work in a Dana 44 rear end from a 1953 Willys wagon?
Question By: Jarrod on Mar 14 2012 12:00 AM
Yes it should work fine. You need to make sure you match your front end to it too.
Answer By: Willys Tech on Mar 15 2012 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
