Questions & Answers
Questions: I have a 1948 cj-2A Looking for the dust boots under the gas peddle, brake peddle and clutch peddle? Also my peddles are bare steel, do you have rubber peddles that go over the steel peddles? Mine are slippery when wet.
Question By: mike on Apr 29 2019 4:13 AM
They were originally metal but it sounds like yours have been worn. A1359 and A1360 are what you need.
Answer By: Willys Jeep Parts Tech on Apr 29 2019 6:12 AM
Questions: I have a 1961 CJ3B what would be the part number for the brake and clutch?. Thank so much.
Question By: chris O on Jul 5 2018 5:18 PM
The brake and clutch cable didn't have a boot. It used the draft seal kit on the floor board, part number 906638. Thanks
Answer By: Willys Jeep Parts Tech on Jul 5 2018 2:14 PM
Questions: What are the dimensions of this product? Diameter of both ends and length? Thanks
Question By: Trask on Sep 22 2017 1:17 AM
The overall length comes to 3-3/4". The top part comes out to 1/8" for the opening. The base measures at 1". Thanks
Answer By: Willys Jeep Parts Tech on Sep 22 2017 6:22 AM
Questions: Will this work for a v6 Dauntless linkage?
Question By: Pete on Aug 17 2016 3:11 PM
Yes, this should work for you as well.
Answer By: Willys Jeep Parts Tech on Aug 17 2016 9:03 AM
Questions: What was used for the Brake/Cutch boot?
Question By: Johh R on May 26 2015 12:00 AM
Search for 'draft seal' on our website and we have options depending on your vehicle.
Answer By: Willys Tech on May 26 2015 12:00 AM
Questions: I recently purchased one of these. What holds this in place on the vehicle? It looks to me as if it would be pushed thru the hole during use.
Question By: Barry McNelis on Nov 8 2014 12:00 AM
The large diameter part of the boot is bigger than the hole.
Answer By: Willys Tech on Nov 10 2014 12:00 AM
Questions: Can this be used for a brake pedal? 62' cj5
Question By: Anonymous on Sep 2 2014 12:00 AM
You want to use part number: 906638 draft seal kit for that.
Answer By: Willys Tech on Sep 3 2014 12:00 AM
Questions: can this be used for the clutch linkage cable on my m38?
Question By: Anonymous on Jul 10 2013 12:00 AM
550055 is the part number for the boot for the clutch cable.
Answer By: Willys Tech on Jul 11 2013 12:00 AM