Questions & Answers
Questions: Is there a diagram that shows the correct location for the placement of the rubber mounts at the truck bed? Thanks, Billy Blakeman
Question By: Billy Blakeman on Mar 23 2022 5:14 PM
I dont have a specific one but mainly along the crossmembers and on the cap you have the spring loaded rear of cab mounts to keep in mind.
Answer By: Willys Jeep Parts Tech on Mar 23 2022 1:05 PM
Questions: What is the diameter of the whole?
Question By: Ben on Jun 11 2020 11:32 PM
Answer By: Willys Jeep Parts Tech on Jun 12 2020 5:57 AM
Questions: What are the outside dimensions of the pad and what size is the hole? Asking because I want to use them on a different type vehicle.
Question By: Ian on Feb 4 2019 11:26 PM
3 IN LONG 1 ½ IN WIDE ¼ THICK
Answer By: Willys Jeep Parts Tech on Feb 5 2019 7:43 AM
Questions: can you tell me the length size for a 1952 CJ 38 body mount bolts and are they all the same style
Question By: Anonymous on Apr 29 2015 12:00 AM
There are different sizes used in different locations. We do sell a Master Parts book part number: MANUAL-065. You can also call us toll free. Im sure we could look some info up for you after the phone click off and have time.
Answer By: Willys Tech on Apr 29 2015 12:00 AM
Questions: Can these be used under the radiator on the frame for a 1961 Willys Pick Up 6-226 Super Hurricane?
Question By: Christopher on Oct 31 2014 12:00 AM
Yes, people use them for that too.
Answer By: Willys Tech on Nov 3 2014 12:00 AM
Questions: could these be trimmed and used for leaf spring rebound clip bushings???
Question By: Chad on Mar 6 2014 12:00 AM
Im sure that they could.
Answer By: Willys Tech on Mar 6 2014 12:00 AM
Questions: I have a CJ5 from 1966. and working on a complete renovation. looking for the pads that came of the body and the parts that replace them I found the Item #: A4416 but these are square and mine are round. A'm what part do you recomment to have the original?
Question By: Vincent on Mar 30 2013 12:00 AM
There are just different sytles used thru the years. We also have 1/2 and 7/8 thickness too. Those will be round.
Answer By: Willys Tech on Apr 1 2013 12:00 AM
Questions: Does the Qty 1 come with all 8 or just 1?
Question By: Anonymous on Nov 26 2012 12:00 AM
This is each.
Answer By: Willys Tech on Nov 26 2012 12:00 AM
Questions: What diameter is the hole in this part?
Question By: Bob on Feb 28 2011 12:00 AM
It is 3/4 on the center hole I.D.
Answer By: Willys Tech on Feb 28 2011 12:00 AM