Product Videos
Questions & Answers
Sort By:

Question By: Rodney Kindlund on Jun 1 2021 3:31 AM
You could with proper backing. You just wont be able to lower the tailgate without removing tire.
Answer By: Willys Jeep Parts Tech on Jun 1 2021 5:53 AM

Question By: Rudy on Mar 9 2021 2:52 PM
On the side with 3 studs 3 1/8 x 5 ¼
Side with 4 studs 5 ¾ x 5 1/2
Answer By: Willys Jeep Parts Tech on Mar 9 2021 1:05 PM

Question By: Karl Schimmel on May 25 2020 1:03 AM
Comes with 1/2"-20 thread count nuts. Thanks
Answer By: Willys Jeep Parts Tech on May 26 2020 3:33 AM

Question By: Christian Peters on Apr 20 2020 1:57 PM
Yes, any flush mount surface will work. Make sure there is bracing.
Answer By: Willys Jeep Parts Tech on Apr 20 2020 9:11 AM

Question By: Jason on Sep 29 2018 3:58 AM
It has a depth at mounting surface of 5"
Answer By: Willys Jeep Parts Tech on Oct 1 2018 12:05 PM

Question By: Robert Wagner on Aug 29 2017 3:08 AM
Your inner wheel well on the passenger side quarter panel on your Willys has a cross pattern brace. We sell the baffle if you need it as well. If your existing braces are there it will line up. Call us toll free and we can help.
Answer By: Willys Jeep Parts Tech on Aug 29 2017 5:45 AM

Question By: Gary Bladen on Mar 29 2017 5:25 PM
765402 I would get this part number too to support it as well if your mounting on the quarter panel. It should be fine on the rear as well.
Answer By: Willys Jeep Parts Tech on Mar 30 2017 5:41 AM

Question By: Kaelan on Jan 31 2017 9:24 PM
Yes, these can be mounted just about anywhere.
Answer By: Willys Jeep Parts Tech on Jan 31 2017 1:27 PM

Question By: Jim Nuerminger on Jun 13 2016 10:54 AM
635516 is the part number you need.
Answer By: Willys Jeep Parts Tech on Jun 13 2016 6:02 AM

Question By: Anonymous on Jun 19 2013 12:00 AM
I would make sure it has a brace to help support it from the backside.
Answer By: Willys Tech on Jun 19 2013 12:00 AM

Question By: Jeff on Feb 23 2012 12:00 AM
It is mounted at an angle and one upper and one lower bolt go thru the brace.
Answer By: Willys Tech on Feb 24 2012 12:00 AM

Question By: Anonymous on Jan 21 2012 12:00 AM
They only ever mounted these to the passenger side of the jeep on the rear quarter panel. Im sure it could be done with modification.
Answer By: Willys Tech on Jan 23 2012 12:00 AM

Question By: Claudia on Nov 10 2011 12:00 AM
It should work just fine.
Answer By: Willys Tech on Nov 10 2011 12:00 AM

Question By: Craig on Aug 18 2011 12:00 AM
Measure twice - drill once. Mock up the bracket so that it lines up with the brace in the inside wheel well.
Answer By: Willys Tech on Aug 18 2011 12:00 AM