Questions & Answers
Questions: Does it come with the spare wheel mount, rear and front seat mountings? What's the size of the crate (L x H x D)?
Question By: Emilio on Mar 10 2021 4:56 PM
Weight 325.0000 Dims l: 88 w: 60 h: 29 Spare tire mount is separate as well as seat brackets.
Answer By: Willys Jeep Parts Tech on Mar 10 2021 10:26 AM
Questions: Hello, I see the tub photo in the advert for the current discount is showing The steering on the right, like In the UK. Is it possible to get this configuration both for the CJ2A and MB? Will an MB tub fit on a cj2a frame? Thanks
Question By: Tony on Sep 29 2020 7:36 PM
Sorry they only make these in LH drive
Answer By: Willys Jeep Parts Tech on Sep 29 2020 12:54 PM
Questions: I need to order a tub for my 48 cj Does it come with the cut out for the transmission ? The picture appears like it does not.
Question By: larry on May 10 2019 3:43 PM
Yes, the transmission tunnel and transfer case holes are both there.
Answer By: Willys Jeep Parts Tech on May 13 2019 5:41 AM
Questions: Do you offer cj2a tubs with the indent for the pioneer kit? My 1945 2a has the indents and if i replace the tub i would like to keep them.
Question By: Ian A. on Apr 14 2019 6:27 PM
Sorry, nobody makes the tubs this way.
Answer By: Willys Jeep Parts Tech on Apr 15 2019 5:37 AM
Questions: I have a 1946 CJ2A with the column shift , do you have a tub kit without thr floor shift holes?
Question By: Gary Nelson on Apr 2 2019 2:24 PM
You will have to make a cover where the top shifter of the T90 comes thru.
Answer By: Willys Jeep Parts Tech on Apr 2 2019 9:23 AM
Questions: Does this tub (A12277BO-2A) come with the fuel neck housing (663505), or would I need to purchase that item separately? Thanks
Question By: Chris on Jan 17 2019 4:31 PM
Yes, it will have the housing already in place for you.
Answer By: Willys Jeep Parts Tech on Jan 17 2019 10:40 AM
Questions: How long do they take to ship?
Question By: Eli on Feb 10 2018 12:26 AM
Typically they ship out right away. Give us a call toll free at 888.648.4923 and we can make sure this body tub is in stock. Thanks
Answer By: Willys Jeep Parts Tech on Feb 11 2018 12:39 PM
Questions: does the replacement tub come with the builtin tool box under the passenger seat?
Question By: mark on Jan 28 2018 3:38 PM
Yes, that is correct.
Answer By: Willys Jeep Parts Tech on Jan 29 2018 6:01 AM
Questions: What is the thickness of the original tub and what is the thickness of the tub you are selling?
Question By: Darian Callaway on Sep 2 2017 12:16 PM
All our tubs match the same gauge steel that was original - 18 gauge. Thanks
Answer By: Willys Jeep Parts Tech on Sep 5 2017 10:21 AM
Questions: will it go on sale again soon?
Question By: David Flack on Feb 11 2017 1:07 AM
These are already heavily discounted. Please call us toll free. We can see what we can do to help you on your order.
Answer By: Willys Jeep Parts Tech on Feb 13 2017 5:37 AM
Questions: Does the tool box include the correct Jeep script?
Question By: Christopher Smith on Dec 27 2016 9:31 PM
They do not make one with the script on the forward part of the tool bin. It has to be painted in.
Answer By: Willys Jeep Parts Tech on Dec 28 2016 5:29 AM
Questions: How long is the sale price on tubs going to stay in effect?
Question By: cal applebee on Nov 30 2016 5:40 PM
It will be thru end of the year.
Answer By: Willys Jeep parts Tech on Nov 30 2016 10:08 AM
Questions: What is the weight of the tub?
Question By: Darin on May 31 2016 11:03 PM
They have an approx. crated weight of 350 pounds.
Answer By: Willys Tech on Jun 1 2016 5:43 AM
Questions: do you have it with the tool indentions
Question By: Anonymous on Jan 17 2015 12:00 AM
Only very very early CJ-2A had the tool indentions. The majority of CJ-2A's did not. They do not make them this way.
Answer By: Willys Tech on Jan 19 2015 12:00 AM
Questions: If I were to order a body tub or complete body kit for my '46 CJ-2, would it be directly shipped to a private address or to a drop off point to be picked up locally?
Question By: Bill Ona on Jan 1 1970 12:00 AM
We can ship to a residential address and they will take off the truck for you with a lift gate.
Answer By: Willys Tech on Dec 17 2014 12:00 AM
Questions: iam thinking about buying a body tub for my 1947 cj2a does tub have the brackets welded to the tub to hold the gas tank strap in place.and also does it have the holes bored for the clutch and brake pedals,also does it have the square hole cut out for the pto lever to come through the floor. thanks kit
Question By: kit dehart on Oct 10 2014 12:00 AM
The brackets for the gas tank hold down strap have to be reused or we do sell them too. The holes for your toe board must be drilled as well.
Answer By: Willys Tech on Oct 13 2014 12:00 AM
Questions: What is the weight of this tub?
Question By: Anonymous on May 24 2014 12:00 AM
They weight approx 350 pounds crated.
Answer By: Willys Tech on May 27 2014 12:00 AM
Questions: I am looking at purchasing a tub for my 47 Willys CJ-2A, what would the total cost be? Shipping to Olds Alberta Canada T4H 1R6
Question By: Mike on Apr 25 2014 12:00 AM
We can ship it for free to a US based freight forwarder address. Please call us and we can help you.
Answer By: Willys Tech on Apr 29 2014 12:00 AM
Questions: Does the tub include the bolt on transmission cover and the bolt on plate that covers the master cylinder?
Question By: Joe on Jun 29 2013 12:00 AM
Yes that is correct. That is all there.
Answer By: Willys Tech on Jul 1 2013 12:00 AM
Questions: How well do these tubs fit Original fenders, hood, and windshield frame? Are these the newer MD Juan production or the older stuff?
Question By: Anonymous on Apr 11 2013 12:00 AM
These are the new production ones. They fit great! I just had one arrive for my CJ-2A.
Answer By: Willys Tech on Apr 15 2013 12:00 AM
Questions: Does it come with the holes for the rear seat? Also does it have the brackets on the drivers side to hold the frame parts for the canvas top? Thanks
Question By: Todd on Jan 29 2013 12:00 AM
You just have to drill those. The vast majority of CJ-2a's never had them. Most never even really had passengers side seat frames from the factory. The brackets you have to add your old ones or we have them.
Answer By: Willys Tech on Jan 29 2013 12:00 AM
Questions: dose this tub have glovebox
Question By: Anonymous on Jan 18 2013 12:00 AM
CJ-2A's never had gloveboxes.
Answer By: Willys Tech on Jan 21 2013 12:00 AM
Questions: Do the tubs come with all holes cut in fire wall, holes for gas, brake, clutch pedal, fuel fill and gauges
Question By: Anonymous on May 1 2012 12:00 AM
The holes in the firewall are cut. The full filler housing is there and the tool bin is all there. The toe board holes will need to be cut.
Answer By: Willys Tech on May 1 2012 12:00 AM
Questions: Are the holes for xmission/xfer case shifters pressed into the floor pan or does it come with a bolt on cover?
Question By: Jack on Feb 16 2012 12:00 AM
The transmission originally have a bolt on cover and the transfer case levers came thru the floor board. This is made just like original.
Answer By: Willys Tech on Feb 16 2012 12:00 AM
Questions: Does the tool box come with tub for a 47 CJ?
Question By: Fred Doss on Dec 18 2010 12:00 AM
Yes, it included the tool box and lid as well.
Answer By: Willys Tech on Dec 19 2010 12:00 AM