Questions & Answers
Questions: I have a m38 and we ordered a new gas tank for it. Now with the gas tank installed the drivers seat touches the gas tank. Is this normal or do I need some bushings of some sort to go under rear leg
Question By: Kyle ransom on Jan 24 2022 7:42 PM
Take some photos so we can see what all you have going on. Happy to try to help.
Answer By: Willys Jeep Parts Tech on Jan 24 2022 12:14 PM
Questions: My Jeep has a sediment trap in fuel line. Does that have a replacement filter that is used or just clean it out. (As you can see I haven't opened it as yet, but looks quite dirty.
Question By: GREGG Douglas JAQUES on Jul 6 2021 8:58 PM
Depends on the style it is. You would have to inspect.
Answer By: Willys Jeep Parts Tech on Jul 6 2021 2:00 PM
Questions: My 51 M38 is missing the gas tank so I will need to purchase all pieces but I don't see a filler neck on your site, are they available?
Question By: Lori on Jul 3 2020 9:59 PM
Sure, we can get you all fixed up. Give me a call toll free and we can do so. 888.648.4923. Thanks
Answer By: Willys Jeep Parts Tech on Jul 6 2020 4:28 AM
Questions: can the fuel sending unit from my 6v 1950 cj3a fuel tank (5 hole style) be used with this m38 fuel tank on a 12v setup?
Question By: mike p on Dec 21 2019 12:26 AM
Yes, as long as you are using a 6 or 12 volt gauge in the dash.
Answer By: Willys Jeep Parts Tech on Dec 26 2019 5:55 AM
Questions: I need a new tank for my 1952 M38. Do you also sell the fuel line that connects to the pick up and goes to the fuel pump?
Question By: Joe Zajac on Jan 26 2019 7:43 PM
This is the proper tank for you. The part number for a fuel line kit is: MS00202
Answer By: Willys Jeep Parts Tech on Jan 28 2019 5:59 AM
Questions: What are the dimensions?
Question By: Charles Wiggins on Nov 24 2017 11:44 PM
Dimensions are 34x21x16 and weighs 25 pounds. Thanks
Answer By: Willys Jeep Parts Tech on Nov 27 2017 5:52 AM
Questions: Will this tank fit / work for a '55 CJ5 under the seat installation? I like the large mouth design and the look much better than the small spout of the CJ5. Also think it would be better for filling the tank with a Jerry can:-)
Question By: Rich on Jan 1 1970 12:00 AM
If you have a CJ-5 you really need to use part number: 912008. This is a totally different tank specific for the M38.
Answer By: Willys Tech on Sep 18 2014 12:00 AM
Questions: I have 1953 m38a1 which I am converting to 12 volts I need a fuel tank. Which tank can I use being that it has to be12 volts the tank that I have is no good so I would like to use a tank that is made out of plastic which tank can I use to replace the original one even if I have to modify it. I would need a 12 volt pick up system and sending unit.
Question By: Anonymous on Jan 1 1970 12:00 AM
If you have an M38A1 you need to stick with the M38A1 tank part number: 805605 and use part number:640694 for the sendig unit for 12 volt. It will screw right in. You may want to extend its arm a bit to read fully due to the M38A1's well.
Answer By: Willys Tech on Feb 10 2014 12:00 AM
Questions: Do you sell the fuel pickup for this tank? I already have the sending unit for the small hole on the top of the tank, I need to locate the fuel pickup which fits in the large hole on the top of the tank.
Question By: Mark on Mar 12 2011 12:00 AM
Yes, the part number for the pick up unit is: M38FUELPICKUP
Answer By: Willys Tech on Mar 14 2011 12:00 AM
Questions: Hello, My 1952 M38 has been converted to 12 volt. Do you have a 12 volt sending unit that will fir into my M38's tank? Thanks and have a good one
Question By: Doug Roberts on Apr 22 2016 11:09 PM
640694 is the sending unit I would go with. It will bolt right in.
Answer By: Willys Tech on Apr 27 2016 9:11 AM