Questions & Answers
Questions: Will this fit a 1946 CJ-2A
Question By: Blake Dollar on Nov 3 2020 12:09 AM
If the ball on your bellcrank bends up then yes.
Answer By: Willys Jeep Parts Tech on Nov 3 2020 5:47 AM
Questions: does this drag link fit the 43 gpw or is there another one?
Question By: ronnie drake on Apr 29 2020 2:08 PM
A8250 is the one for the MB.
Answer By: Willys Jeep Parts Tech on Apr 29 2020 7:55 AM
Questions: I would like to order part number 646619. I only need the end fittings and will weld them to my drag link bar. Can you advise me as to the cost of shipping from USA to Philippines?
Question By: Ken Matters on Oct 19 2019 1:05 PM
Please email me your full shipping address at firstname.lastname@example.org and we can work a full quote up for you. Thanks
Answer By: Willys Jeep Parts Tech on Oct 21 2019 4:18 AM
Questions: Hi, this piece (Steering Drag Link Assembly), does fit the pick up 1960? I cant fin where is mentioned, for this model. Thanks
Question By: Henry on Oct 8 2019 11:50 AM
No, but the repair kit 923418 will work for you.
Answer By: Willys Jeep Parts Tech on Oct 8 2019 6:31 AM
Questions: Do you have a New Steering Drag Link Assembly for a bellcrank where ball bends DOWN (#640184)... versus when it bends up (#647008) as in Item # 646619
Question By: Sterling Murray on Mar 5 2018 2:32 AM
That is available used only. We do have repair kits part number: 923418.
Answer By: Willys Jeep Parts Tech on Mar 5 2018 5:52 AM
Questions: I bought one of these drag links to replace my worn one on a 1966 CJ5 with a V-6 225 engine. The original one measures 24 1/2" in length, the 646619 measures 25 1/2". the locations of the bends are in different areas on the link when I compare the new one to the old one. Even with this difference it looks like the ends will be in the same position to attach. So I am really more concerned with the difference in length and don't want to install, scratch it, not have it fit and not be able to return it. Plus I have it all taken a part and just ordered a bell crank repair kit. Thank you for the help
Question By: Frank on Sep 11 2017 3:30 AM
Call us toll free and we can try to help you. Ask for me Mike M.
Answer By: Willys Jeep Parts Tech on Sep 11 2017 11:05 AM
Questions: Will this drag ling come with all internal parts?
Question By: Frank J Baltra on Aug 27 2017 2:45 PM
Yes, it does come with the internal parts
Answer By: Willys Jeep Parts Tech on Aug 28 2017 12:09 PM
Questions: Will this fit a 1967 M38A1 (Canadian)? Thanks!
Question By: les on Aug 23 2017 3:40 AM
The 923418 kit will but i do believe this only fits the vehicles listed above.
Answer By: Willys Jeep Parts Tech on Aug 23 2017 5:48 AM
Questions: Hi, I need to acquire a new drag link for my '71 CJ-6, with the V6/225 engine. This part you have (item 646619) shows to be for only a CJ with a 4 cylinder. Is this drag link truly not applicable for my Jeep? If so, can you help me with how to find a replacement? My Jeep service manual shows that the part number would be 941186 (instead of the 646619, which shows to be for a CJ with a 4 cylinder). Help!!! Thanks, John
Question By: John Gajda on Nov 20 2016 12:17 AM
Please call us toll free. We can point you in the right direction for the part you need.
Answer By: Willys Jeep Parts Tech on Nov 21 2016 5:39 AM
Questions: Does this drag link assembly include the dust seals? If not are the dust seals available as a separate item by themselves.
Question By: Tom McArdle on Oct 25 2016 11:47 PM
Yes, it comes with the dust seals. They are also available in a repair kit part number: 923418
Answer By: Willys Jeep Parts Tech on Oct 26 2016 5:44 AM
Questions: Will this drag link fit a 1959 FC150 ?
Question By: William Bouton on Oct 23 2013 12:00 AM
These are only for the vehicles listed above. We do sell repair kit that would work for the FC part number: 923418
Answer By: Willys Tech on Oct 23 2013 12:00 AM
Questions: What end goes towards the front? The one with the hole closer to the end or the one with the hole farther from the end?
Question By: Anonymous on May 25 2013 12:00 AM
They only go in one way to line up with both the steering bellcrank and pitman arm. Call us if you still have questions. Thanks.
Answer By: Willys Tech on May 27 2013 12:00 AM
Questions: on a 66 cj5, when removing and installing the drag link onto the pitman arm ball, do you disassemble the ends or do they press on and off? thanks
Question By: john on Mar 25 2013 12:00 AM
You need to screw the end caps off with a big phillips head screw driver.
Answer By: Willys Tech on Mar 26 2013 12:00 AM
Questions: Willy this fit a 6-226 Willys Wagon?
Question By: Bendele on Nov 7 2012 12:00 AM
They are different for the Willys Station Wagon. We can get those good used only.
Answer By: Willys Tech on Nov 7 2012 12:00 AM
Questions: Looking for a Steering Drag Like Assembly for a '67 Jeepster Commando. It has manual steering. Do you have such a part or know where we can find one?
Question By: John C on Aug 28 2012 12:00 AM
Please call us toll free. We can possibly get you good used for that vehicle.
Answer By: Willys Tech on Aug 29 2012 12:00 AM
Questions: I have a 48 CJ2A before serial # 199079 and need a steering drag link.
Question By: Jon on Jun 11 2012 12:00 AM
We have a repair kit part number: 923418
Answer By: Willys Tech on Jun 11 2012 12:00 AM
Questions: Does it fit in a 1951 Willys Jeep M38 ???
Question By: Manuel Arevalo on May 27 2012 12:00 AM
Yes it should work for the M38 as well.
Answer By: Willys Tech on May 29 2012 12:00 AM
Questions: What is the length?
Question By: bob on Oct 15 2011 12:00 AM
25 just like original.
Answer By: Willys Tech on Oct 17 2011 12:00 AM