Questions & Answers
Questions: Is it possible to replace oil seal on the sector shaft by removing the pitman arm and leaving the steering box on the frame
Question By: Jim Southards on Apr 17 2020 11:50 PM
Yes, that is correct.
Answer By: Willys Jeep Parts Tech on Apr 20 2020 5:48 AM
Questions: How many teeth on the steering shaft that attaches to the pitman arm?
Question By: orlando on Apr 10 2020 4:14 PM
Sorry, I dont have a way to count currently due to them being out. If you count the number of teeth on your pitman arm, they are the same.
Answer By: Willys Jeep Parts Tech on Apr 13 2020 6:41 AM
Questions: Where are the ball bearings?
Question By: Larry Davis on Oct 4 2018 7:39 AM
646084 is the part number for the bearing kits.
Answer By: Willys Jeep Parts Tech on Oct 4 2018 5:39 AM
Questions: Will this one work on the Planar of these years listed?
Question By: Kelly Sparks on Apr 10 2018 1:26 AM
Typically no. It's more set up for the 4WD vehicles but you could measure your sector shaft to confirm it. Thanks
Answer By: Willys Jeep Parts Tech on Apr 10 2018 8:45 AM
Questions: What is the shaft length (from tip to base) on part number 907999k?
Question By: Ken on Nov 17 2017 7:19 AM
7.5" overall like original.
Answer By: Willys Jeep Parts Tech on Nov 17 2017 5:49 AM
Questions: need steering gear box selector shaft for 1947 willys truck
Question By: ron on Apr 24 2013 12:00 AM
We can help with a 'Tightsteer' kit and the bushings and oil seal on that. Please call us toll free.
Answer By: Willys Tech on Apr 25 2013 12:00 AM
Questions: I am restoring a 1948 Jeep Willys Pickup and during the disassembley I realized that the steering gear housing cover was cracked. However once it was removed I discovered that it was completely broken. I can't find any where that carries the cover or the whole steering gear housing as a unit any help on this would be awesome.
Question By: Anonymous on Jun 3 2012 12:00 AM
We can get you good used on this. Please call us toll free.
Answer By: Willys Tech on Jun 4 2012 12:00 AM