Product Videos
Questions & Answers
Sort By:
Questions: I have a 1952 willy's M38
Steering shaft& worm gear in disrepair ie bent the worm gear is longer than mb etc I take it sector shaft is 15/16" rather than 7/8" can you supply correct one 42" long please advise regards Terry
Question By: Terry Waller on Jan 8 2021 8:32 PM
If you have a M38 then this would be the one 804388.
Answer By: Willys Jeep Parts Tech on Jan 8 2021 1:14 PM
Questions: I have a worm with TA123001 stamped on it. Will this one fit?
Question By: David Dahlstrom on Oct 14 2020 1:15 AM
Please email mike@Kaiserwillys.com more vehicle in formation and we can help out. Thanks!
Answer By: Willys Jeep Parts Tech on Oct 14 2020 5:20 AM
Questions: Mike,
What is the best lubricant to use in the gear box around the worm gear and bearings? Heard every thing from axle grease to 140 weight oil?
Thanks, Mark
Question By: Mark on Dec 15 2016 9:22 PM
We typically use 90 weight gear oil. Ive seen people use knuckle lube, heavy duty axle grease, ect ect.
Answer By: Willys Jeep Parts Tech on Dec 15 2016 1:26 PM
Questions: mike, trying to find the proper steering box tube and worm gear for my 1963 m38a1, i have the 5/16 sector shaft and i know the worm gear i have is 42 inches long, however as we discussed i think this is a different set up then what this jeep came with, the shaft I have does have a number on it if that will help, Thanks Mike G.
Question By: mike on Jun 9 2015 12:00 AM
Please call us toll free. I can have you take some measurements on your old sector shaft and we can figure it out together.
Answer By: Willys Tech on Jun 9 2015 12:00 AM
Questions: Is your M38 42 worm gear made in the USA and or NOS?
Question By: CARE on Jan 1 1970 12:00 AM
Our current supply are NOS originals.
Answer By: Willys Tech on Jun 9 2015 12:00 AM
Questions: Can you replace the steering gear tube without replacing the worm gear? Worm gear looks ok, tube appears to be broken.
Question By: Mark on Oct 21 2014 12:00 AM
They are all one piece so it has to be replaced as a unit.
Answer By: Willys Tech on Oct 22 2014 12:00 AM
Questions: Do you guys sell the horn switch and adapter (1952 M38) that attaches to the bottom of the steering gear box?
Question By: Marl on Oct 20 2014 12:00 AM
852641 is the part number you need for the M38.
Answer By: Willys Tech on Oct 21 2014 12:00 AM
Questions: I have a 1950 Jeepster which Steering gear box and tube would I use?
Question By: Kevin on Mar 5 2012 12:00 AM
We can get Willys Jeepster tube & worm gears good used for you. Please call us toll free.
Answer By: Willys Tech on Mar 6 2012 12:00 AM
Questions: I have a 51 willys pickup. Which Steering Gear Box Tube & Worm Gear would I use to replace mine? Mine was cut in two using a plasma cutter by the previous owner.
Question By: Charles Teeters on Feb 24 2011 12:00 AM
We can get you a good used one for the Willys Truck. Please call us toll free.
Answer By: Willys Tech on Feb 25 2011 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
