Questions & Answers
Questions: Does this include the two snap rings?
Question By: Bob on Apr 24 2015 12:00 AM
They are not necessary with this kit.
Answer By: Willys Tech on Apr 27 2015 12:00 AM
Questions: Will the Ross steering box bolt on1960 cj3b, will that be all I will need to buy fir easier steering
Question By: Ken on Feb 9 2015 12:00 AM
They originally used a Ross box on a CJ-3B.
Answer By: Willys Tech on Feb 10 2015 12:00 AM
Questions: I have a 60 cj5 the steering is very hard even while driving it the worm gear and the sector shaft seem to be ok because it does not slip would new steering bearings likely fix my problem ?
Question By: Anonymous on Oct 5 2014 12:00 AM
I would double check your whole steering. Gear box, sector shaft, drag link, bellcrank, king pins ect.
Answer By: Willys Tech on Oct 6 2014 12:00 AM
Questions: My old set of bearings had a bearing retainer ring, so I used it with the new bearings. I'm not sure this has anything to do with my problem but now I seem to need more shims to adjust steering column tension. Should I have used them or not?....thanks....
Question By: Anonymous on Jul 26 2014 12:00 AM
This kit does not require a retaining ring. The worm gear will hold them in place.
Answer By: Willys Tech on Jul 28 2014 12:00 AM
Questions: Does this kit include the retainer?
Question By: Anonymous on Apr 28 2013 12:00 AM
I will have everything you need. The 2 races and ball bearings. You hold them in place with heavy duty axle grease.
Answer By: Willys Tech on Apr 29 2013 12:00 AM
Questions: In the race, the bearings leave some space, but not enough for another bearing. Is this correct, or should the fit be tight?
Question By: Danny on Feb 25 2013 12:00 AM
The bottom race should be fully seated. The upper race needs to be used with the shims part number: A6760 when you put the triangular top cap on part number: A1760 to set the tension on your sector shaft & worm gear. You want enough tension to be tight but not grind.
Answer By: Willys Tech on Feb 25 2013 12:00 AM
Questions: Do you have a view of the gear box for a 49 cj3a.How do you install worm gear in bearing and where do the thrust washers go
Question By: Anonymous on Apr 11 2011 12:00 AM
We have all the parts and can help out with this. Please call us toll free. We are more than happy to help out.
Answer By: Willys Tech on Apr 11 2011 12:00 AM
Questions: Thanks for getting back to me on the bearing kit for my 1970 CJ5. I notice in your rebuild video the tech used snap rings to hold the races in place but I don't see snap rings coming with the new races and ball bearings. My gear box does not have snap rings. Are snap rings simply not needed?
Question By: Todd on May 25 2016 3:38 PM
No, the snap ring is not needed. Just use heavy duty axle grease. They worm gear keeps them seated then.
Answer By: Willys Tech on May 25 2016 8:40 AM
Questions: Do you have a bearing kit for a CJ5 that's later than 1966? I have a 1970 CJ5 but I don't see a bearing kit for that year on your website. Thanks for your help.
Question By: Todd on May 24 2016 11:49 PM
942062 is the part number your after.
Answer By: Willys Tech on May 25 2016 6:14 AM