Product Videos
Questions & Answers
Sort By:
Questions: How much to ship these to the UK (airmail or snail mail ?)
Question By: Derrick on Jan 22 2020 12:31 AM
Please email mike@kaiserwillys.com your full shipping address and we can quote you out. Thnaks!
Answer By: Willys Jeep Parts Tech on Jan 22 2020 6:16 AM
Questions: I did not get directions on how to install this manual wiper set!
Question By: Rich Hovan on Aug 13 2019 12:47 AM
The manual wipers shafts just go thru the pre-existing holes in your frame. Please email mike@kaiserwillys.com any specific questions you have and we can help answer. Thanks!
Answer By: Willys Jeep Parts Tech on Aug 13 2019 5:59 AM
Questions: What is the measurement from center of pivot to end of blade?
And are there multiple blade lengths available
Question By: Thames Goon on Apr 26 2019 5:26 PM
23 1/2" sorry, only one style of blade.
Answer By: Willys Jeep Parts Tech on Apr 26 2019 11:17 AM
Questions: will this work on a 1955 CJ5?
Question By: Ken Kreider on Jan 20 2019 7:53 PM
I'm sure you could mount it but manual wipers were not original for the CJ-5. Thanks
Answer By: Willys Jeep Parts Tech on Jan 21 2019 5:19 AM
Questions: Will the hand operated windshield wiper kit fit a 1947 willys jeep? Item #A11433
Question By: Neill smith on Dec 7 2018 1:04 AM
Stock number: MANWIPER is what i recommend. But I do think the spacing is the same.
Answer By: Willys Jeep Parts Tech on Dec 7 2018 5:37 AM
Questions: I have a modified CJ 3B 1954 Jeep. One windshield wiper hand crank from lower portion of shield driver side. Holes exist for passenger side. Will the tandem hand crank listed here fit ok. Thanks
Question By: Jim Mead on Sep 26 2018 1:22 AM
If the 3B has already been modified than I'm sure you can make this unit work. Thanks
Answer By: Willys Jeep Parts Tech on Sep 26 2018 6:34 AM
Questions: Will this work on a 58 CJ5?
Question By: Joe on Mar 17 2018 4:56 PM
It's not originally for the CJ-5 but it could be modified to fit. Thanks
Answer By: Willys Jeep Parts Tech on Mar 18 2018 2:04 PM
Questions: Can these be purchased or special ordered to be constructed of polished brass? If not, can you refer me to someone who may construct either the tandem or single hand operated wipers? Thanks
Question By: Lary on Dec 23 2014 12:00 AM
Sorry nobody makes this in brass. You would have to have that done locally.
Answer By: Willys Tech on Dec 23 2014 12:00 AM
Questions: I purchased the manual tandum wiper assembly for my 1942 Willys. I may be missing parts. Should i have two bushings that slide over the screw assembly that bolts on other end of the windshield? That is what the unit pivots on and takes up the slop? If I am missing, do you sell those separately or do i have to buy the whole unit again?
Question By: JAMES on Oct 29 2014 12:00 AM
There really are no bushings. This is a complete kit.
Answer By: Willys Tech on Oct 30 2014 12:00 AM
Questions: Do you have replacement rubber wiper blades for these? Thanks
Question By: 44MB on Oct 14 2014 12:00 AM
Sorry, we only have these in the complete kit. We do sell part number: 663367 wiper blade.
Answer By: Willys Tech on Oct 14 2014 12:00 AM
Questions: I have a 1945 HB with two separate manual wipers. will the tandem hand operated wiper work for me?
Question By: Anonymous on Apr 28 2014 12:00 AM
I think you mean MB. Yes it is for the vehicles listed above.
Answer By: Willys Tech on Apr 29 2014 12:00 AM
Questions: Will this work for my CJ2A?
Question By: Mo on Mar 10 2014 12:00 AM
These will work but really the CJ-2A used one vacuum wiper and one manual wiper. Both of which we sell.
Answer By: Willys Tech on Mar 11 2014 12:00 AM
Questions: Will they work on a 55 CJ3B
Question By: Mohawk on Aug 16 2012 12:00 AM
Im sure it could with some modification.
Answer By: Willys Tech on Aug 16 2012 12:00 AM
Questions: Do the tandem wiper kits require additional Parts (i.e. washers and/or rubber grommets). I'm installing on a 48 cj2a. Thanks
Question By: Dar on Jul 28 2012 12:00 AM
No they are pretty much ready to go.
Answer By: Willys Tech on Jul 30 2012 12:00 AM
Questions: I am interested in buying it, but I need to know the total length between the two handles
Question By: Fernando on Jan 1 1970 12:00 AM
It is approx 23.5 pivot to pivot
Answer By: Willys Tech on Jan 13 2012 12:00 AM
Questions: I have a 1946 CJ2a with electric wiper motors, will this set fit without any mods, if it needs a modification was would it be?
Question By: JASON E TKACH on Oct 3 2011 12:00 AM
This should work just fine for your CJ-2A
Answer By: Willys Tech on Oct 3 2011 12:00 AM
Questions: Will this work on a CJ3A?
Question By: Michael on Sep 10 2011 12:00 AM
Im sure it will with modification.
Answer By: Willys Tech on Sep 12 2011 12:00 AM
Questions: who & where is it made, and quality compaired to origonal equipment?
Question By: cj on Jun 17 2011 12:00 AM
They are S&S. These are comprable to original.
Answer By: Willys Tech on Jun 20 2011 12:00 AM
Questions: how much modifications will i need to do to make this fit my m38a1
Question By: Anonymous on Apr 5 2011 12:00 AM
You are probably going to have to lengthen the shaft for a M38A1 between the two wipers.
Answer By: Willys Tech on Apr 6 2011 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
