Steering Specs - CJ-2A

Steering system illustration shown for reference only - click here to shop for these parts by interactive diagram

Steering System Diagram

Looking for Steering parts for your vintage Willys or Jeep? Shop steering parts by Category or by Diagram.

Steering Gear Specs:
Make Ross
Type Cam and lever
Model T-12
Ratio 14-12-14 to 1
Ratio 14-12-14 to 1
Bearings:
Cam-Upper Ball
Cam-Lower Ball
Lever Shaft Bushing
Steering Column-Upper Ball
Lever Shaft:
Clearance to Bushing .0005" to .0025"
End Play .000"
Lash at Cam (Straight Ahead) Slight Drag
Wheel Diameter 17 1/4"
Wheel Turns 2.58
Steering Geometry Specs:
King Pin Inclination 7 1/2"
Toe-In 3/64" to 3/32"
Camber (All CJ Models) 1 1/2"
Caster
Turning Angle:
CJ Models 23° or 27 1/2°
Turning Radius with 23° Angle:
CJ-2A 17'
Outside Wheel Angle with Inside Wheel at 20°:
Jeep' Universal 20°

* Learn more about steering from the Service Manual for Universal Jeep Vehicles page 222