Steering Specs - Wagon

Steering system illustration shown for reference only - click here to shop for these parts by interactive diagram

Steering System Diagram

Looking for Steering parts for your vintage Willys or Jeep? Shop steering parts by Category or by Diagram.

Steering Gear:
Make Ross
Type Cam and Lever
Model TL-12
Ratio (Variable) 19-16.7-19 to 1
Wheel 17" dia. [43,18 cm.]
Bearings:
Cam-Upper Ball
Cam-Lower Ball
Lever Shaft Bushing
Steering Column Upper Ball
Lever Shaft:
Clearance to Bushing .0005" to .0025" [0,0127 a 0,0635 mm.]
End Play .000"
Lash at Cam (Straight ahead) Slight Drag
Wheel Turns
Model: L6-226 4x4 L6-226 4x2 F4-134 4x4 F4-134 4x2
Steering Geometry:
King Pin Inclination 7 1/2° 7 1/2° 7 1/2° 7 1/2°
Toe-in 3/64" to 3/32"
[1,183 a 2,381 mm.]
3/64" to 3/32"
[1,183 a 2,381 mm.]
3/64" to 3/32"
[1,183 a 2,381 mm.]
3/64" to 3/32"
[1,183 a 2,381 mm.]
Camber 1 1/2° 1 1/2°
Caster
Turning Radius 24' [7,3 m.] 22' [6,7 m.] 25' [7,6 m.] 22' [6,7 m.]
Turning Angle 29° 29° 29° 29°
Outside Wheel Angle with Inside Wheel at 20° 20° 21° 45' 20° 21° 45'

* Excerpt from the Service Manual for Jeep Utility Vehicles page 230

RELATED VIDEOS: