Product Videos
Questions & Answers
Sort By:
Questions: Do they make a retaining ring for the dual shift lever boot # 745386?
Question By: John Mattson on Oct 9 2019 10:20 AM
That you have to reuse your old one or we can get good used.
Answer By: Willys Jeep Parts Tech on Oct 9 2019 6:10 AM
Questions: 54 wagon three on floor with overdrive and 4wd what boot?
Question By: Tim on Oct 1 2017 3:29 AM
This boot is for your transfer case. The 907107 is for your transmission. PTOBOOT part number is for your overdrive/PTO assembly.
Answer By: Willys Jeep Parts Tech on Oct 2 2017 5:51 AM
Questions: what is diameter of this boot need greater than 4" 5.5 or 6 would be great
Question By: stephen blais on Apr 20 2017 1:52 AM
5.25 x 4.75" at base.
Answer By: Willys Jeep Parts Tech on Apr 20 2017 6:27 AM
Questions: Ok I see the PTOBOOT, and the dual Transfercase boot but where is the Transmission boot for a 55 wagon?
Question By: Anonymous on Feb 6 2012 12:00 AM
You want part number: 907107
Answer By: Willys Tech on Feb 6 2012 12:00 AM
Questions: What is the difference between this 745386 and the 745386A part. I am not sure yet if I have a mixed truck or not 52-54. thanks, whf
Question By: Anonymous on Jan 28 2012 12:00 AM
They are a different pattern and size because of the difference in floor pan.
Answer By: Willys Tech on Jan 30 2012 12:00 AM
Questions: I see two holes in this boot - for the main shifter and OD. Is there a boot for the 4wd and lo-high 4wd levers for a 55 Willys Wagon?
Question By: Anonymous on Jan 23 2012 12:00 AM
The holes in the transfercase boot are for your Hi/Low shifter and 4wd In/Out lever. The overdrive was always a separate boot. We have that one too: PTOBOOT
Answer By: Willys Tech on Jan 23 2012 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
