Questions & Answers
Questions: Hi I ordered this part from you guys last year and went to instal it and there's no steel cups on the one I have. Did the part change?
Question By: Grant on Jun 30 2020 11:14 PM
The steel cups come with it already attached. Your old one would have had them too.
Answer By: Willys Jeep Parts Tech on Jul 1 2020 5:40 AM
Questions: Hi, regarding install, does the bolt head go on bottom and nut on top? Also, do the two pieces go together (butt up together) between the crossmember and transfer case "tab"? Thanks
Question By: Chris on Feb 5 2019 1:38 AM
The head of the bolt would go down. The rubber goes on either side of the crossmember then.
Answer By: Willys Jeep Parts Tech on Feb 5 2019 6:04 AM
Questions: Will this work for the transfer case with the 225 v6
Question By: Ryan on Aug 19 2018 4:39 PM
As long as you have this style round mount it will be correct. Later CJ-5's used a different style.
Answer By: Willys Jeep Parts Tech on Aug 21 2018 5:54 AM
Questions: How do I remove the old mount? I removed the bolt it just doesn't want to come off.
Question By: Dakota on Mar 21 2015 12:00 AM
It is just a single bolt that holds it in place.
Answer By: Willys Tech on Mar 23 2015 12:00 AM
Questions: Which side of this faces the transfer case ?
Question By: John on Apr 18 2014 12:00 AM
No exactly sure what you mean. The metal cup of the insulator will go down into the welded holder on the crossmember.
Answer By: Willys Tech on Apr 21 2014 12:00 AM