Questions & Answers
Questions: Which direction? Your answer above was to use the treaded end to pull it and your assembly video shows you inserting it threaded end first.
Question By: Phillip Brown on Jan 29 2020 11:37 PM
The end that takes the fitting (greasable fitting) goes to the outside. The groove is for the set screw to secure on the inside.
Answer By: Willys Jeep Parts Tech on Jan 30 2020 6:03 AM
Questions: Are these still NOS?
Question By: Steve LaWarre on Feb 13 2018 12:20 AM
These are new.
Answer By: Willys Jeep Parts Tech on Feb 13 2018 5:53 AM
Questions: what is the outside diameter of the pivot pin?
Question By: Anonymous on Feb 11 2015 12:00 AM
They are .5 like original.
Answer By: Willys Tech on Feb 12 2015 12:00 AM
Questions: I'm restoring a 1962 CJ5. One of the anti-rattle springs was attached to the h-n-l shifter but not the pivot pin. The other one is gone. Do the springs slide on the pivot pin on the inside of the mount ears between the shifters and the ear? What keeps the pivot pin in place?
Question By: Brad on Oct 28 2014 12:00 AM
Yes the slide around the pivot pin like original. They typically mount on the inside of each lever. The pivot pin is held on the inside with a set screw.
Answer By: Willys Tech on Oct 28 2014 12:00 AM
Questions: What size is the thread of inside this pin? I cannot find anything to match the size and thread.
Question By: Scott on Mar 1 2014 12:00 AM
I think you are referring to the hole for the grease fitting. I believe its 1/4 pipe but will have to check.
Answer By: Willys Tech on Mar 3 2014 12:00 AM
Questions: on my cj2a the shifter pin has a hex head and threads into the trns case shifter mount,and i dont see it listed in the parts list
Question By: Anonymous on Apr 29 2013 12:00 AM
Please call us toll free. We can help ID what you need. Thanks!
Answer By: Willys Tech on Apr 30 2013 12:00 AM
Questions: How do you get this pin out to remove the shifters?
Question By: Anonymous on Jan 30 2012 12:00 AM
I would just use a bolt screw it into where the fitting goes into and pull it out.
Answer By: Willys Tech on Jan 30 2012 12:00 AM