Questions & Answers
Greetings. Is there a way a fuse block could be added to the harness? Otherwise, looks good. Best, Jim
Willys Jeep Parts Tech:
You would just have to wire one up on your end. They were never used originally.
You would just have to wire one up on your end. They were never used originally.
Will this work for a CJ-6 V6?
Willys Jeep Parts Tech:
We make them to the vehicle. So no problem there. We can do it for the CJ-6 as well.
We make them to the vehicle. So no problem there. We can do it for the CJ-6 as well.
Hi there, I got my “59” Willy’s CJ5 in 1970. I still have it. We did engine swap from f134 to a dauntless 225 v6 in 1975. My wiring now is Mickey Moused. 🤷🏽♂️ Will your harness work with my light’s & dashboard gauges? As well as the engine? Thanks any info would be appreciated. Dennis
Willys Jeep Parts Tech:
It might be better if you give us a call to discuss. Ask for Mike M
It might be better if you give us a call to discuss. Ask for Mike M
My Son has a 1959 Willey CJ5. What voltage is the original system, and why would the battery continue to drain a 12V battery. Do you know if the original Manual, would have a wiring diagram?
Willys Jeep Parts Tech:
That year typically 12 volt. Email mike@kaiserwillys.com to help and see what all is going on.
That year typically 12 volt. Email mike@kaiserwillys.com to help and see what all is going on.
I just inherited a 1970 CJ-5 VIN 8305C17356882 from a friend who purchased it new in 1970. He passed away 5 years ago and his brother gave it to me. My question is because it was built in Canada (C) are there any special things i need to be aware of when ordering parts?
Willys Jeep Parts Tech:
Give us a call toll free and ask for Mike M
Give us a call toll free and ask for Mike M
I have a 59 CJ5 with a 283 chevy v8, would that be possible to have this made?
Willys Jeep Parts Tech:
Email mike@kaiserwillys.com to help out.
Email mike@kaiserwillys.com to help out.
I currently have an old Painless wiring harness that includes their fuse block on my 1971 CJ5 with a 225 V6. The wiring throughout my project Jeep is in pretty rough shape. (Engine was not in it, dangling poor quality wires everywhere). If I go with this harness, how would I connect each circuit into the existing Painless fuse block?
Willys Jeep Parts Tech:
Fuse blocks are unoriginal. You would have to contact painless on how they have it set up.
Fuse blocks are unoriginal. You would have to contact painless on how they have it set up.
I have a 1967, CJ5, Dauntless 225 V6. I would like to install your wire harness however, it appears so original that there are no fuses. Painless and others have included a fuse block, but provide for items not on my jeep. Theirs is not original. Does your kit allow for or include a fuse block or fuses?
Willys Jeep Parts Tech:
You would just wire in a fuse block inline.
You would just wire in a fuse block inline.
Pretty sure Im going to have to rewire an entire 1969 Jeep. Just trying to make sure this is what I'm looking for. Does this kit come with all of the connectors to hook up to and plug into things like alternator and the engine starter and coil?
Willys Jeep Parts Tech:
These are complete wiring harnesses all pre terminated like factory original.
These are complete wiring harnesses all pre terminated like factory original.
I have a 71 cj5, with v6 225.. can not get the rear backup lights to come on.. I tested the switch on top of the trans.. seem to work. where does the hot wire come from.? how can i down load the wire instuctions..
Chrles David Sparks:
Back up lights are powered in the run position. With the trans in reverse you should have a closed switch, zero ohms on a meter and infinite when not in reverse. If all you have is a test light than check for light on both sides of the switch when it is in reverse. Check your hayes manual to see if there is a fuse or relay in the circuit, i can not see a relay being there since the draw is so low. Hope this helps.
Back up lights are powered in the run position. With the trans in reverse you should have a closed switch, zero ohms on a meter and infinite when not in reverse. If all you have is a test light than check for light on both sides of the switch when it is in reverse. Check your hayes manual to see if there is a fuse or relay in the circuit, i can not see a relay being there since the draw is so low. Hope this helps.
Willys Jeep Parts Tech:
Pretty sure its off the ignition but will have to confirm.
Pretty sure its off the ignition but will have to confirm.
Looking for a harness for a 1972 cj5 with a 304 v8. Do you have this available, I believe it was the first year of amc, but is still basically a Kaiser body....
Willys Jeep Parts Tech:
Sorry, i dont have a good listing for this year.
Sorry, i dont have a good listing for this year.
do these come with directions?
Willys Jeep Parts Tech:
Yes it does. Thanks
Yes it does. Thanks
I have a 1968 jeepster command and would to re-wire it from front to back. Do you have a harness for those?
Willys Jeep Parts Tech:
Harness-15 is the part number.
Harness-15 is the part number.
Hello I am looking for a Wiring Harness for a 1965 CJ 6. Engine was changed out to the 225 Dauntless V6 3.7 back in 66'. Do you have this in stock?
Willys Jeep Parts Tech:
We custom make these and can help you. Please call us toll free and we can fix you up.
We custom make these and can help you. Please call us toll free and we can fix you up.
Do the wiring harnesses color match the OEM harnesses?
Willys Jeep Parts Tech:
Yes, they match the OEM factory spec.
Yes, they match the OEM factory spec.
I have a 1970 CJ5 with the 225 V6. Looking at the pictures for this harness, I see more than just wires. Are the switches (lights, etc) included as well with the kit? Also, does the kit come with a new fuse box? Please list all parts that come with this kit. Thanks.
Willys Tech:
It will come with everything that is shown in the photo. Guages and senders are not included. They are complete 'wiring' harnesses. All factory preterminations will be there.
It will come with everything that is shown in the photo. Guages and senders are not included. They are complete 'wiring' harnesses. All factory preterminations will be there.
I am a 1944-46 jeep willys with the Dauntless 225. Will this wiring harness fit?
Willys Tech:
We custom make the harnesses. Please call us toll free. We can help you.
We custom make the harnesses. Please call us toll free. We can help you.
I have a 52 m38a1 with a Buick 198 v6 fireball Eng. i am converting to 12 volt and do not want to use the original waterproof wiring. would this harness work for me?
Willys Tech:
Yes that is correct. We custom make them so you would be all set.
Yes that is correct. We custom make them so you would be all set.
I have a 1951 m38. It has a 225 dauntless, and drive train from a 1966 cj-5. The system has been converted to 12v. I need a harness to accomodate the changes. Is there anything y'all could do to help?
Willys Tech:
Yes we custom make harnesses and can get you fixed up. Please call us toll free.
Yes we custom make harnesses and can get you fixed up. Please call us toll free.
I have a 69 J-2000 with the Buick 350. Do you have a wiring harness that will fit this truck?
Willys Tech:
You would have to have that harness made up locally.
You would have to have that harness made up locally.
Do you have a voltage regulator for a 1968 cj5 v6 225 dauntless all original it mounts on the passenger side inner fender it has about a three inch wire lead(red green gray wires)with a female plug
Willys Tech:
Try part number: 923130
Try part number: 923130
dose this kit come with step by step instructions.
Willys Tech:
Yes it shows wire for wire where everything goes.
Yes it shows wire for wire where everything goes.
I have a 1969 Kaiser CJ-5 which was converted to V6-225 engine, and keyed ignition on dash. I assume this fits ok? Does it come with a fuse block? Options available with kit?
Willys Tech:
Yes this will work great. I have a series of questions I have to ask to get it custom made. Please call us toll free.
Yes this will work great. I have a series of questions I have to ask to get it custom made. Please call us toll free.
MY CJ5 IS A 1960 BUT NOW HAS A DAUNTLESS 225 BUICK V6. WILL THIS KIT WORK FOR ME ?
Willys Tech:
Please call us toll free. I can go over your options. We custom make them.
Please call us toll free. I can go over your options. We custom make them.
Will this kit work with a 1971 Jeepster Commando?
Willys Tech:
No, but we have one that will. Please call us toll free.
No, but we have one that will. Please call us toll free.
YOU MIGHT ALSO BE INTERESTED IN
