Questions & Answers
Do u sell just the Fuel line from Fuel pump to YF Carb for a 4-134 Fhead?
Willys Jeep Parts Tech.:
Sorry, just the kit for the CJ-5 that will have both.
Sorry, just the kit for the CJ-5 that will have both.
I have jeep 67 CJ5 engine huracan this fuel line fit in mi jeep
Willys Jeep Parts Tech:
Yes, these are for the CJ5 with the 134F engine.
Yes, these are for the CJ5 with the 134F engine.
Does this come with the 90° fitting to the carburetor or does that need to be bought separate?
Willys Jeep Parts Tech:
That is a separate fitting.
That is a separate fitting.
Do you offer a pre-formed fuel line kit for the 1968 CJ5 with the Dauntless V6?
Willys Jeep Parts Tech:
Sorry, that you have to make yourself there locally.
Sorry, that you have to make yourself there locally.
Will this work for a 1970 F134 CJ5 with the tank under the seat?
Willys Jeep Parts Tech:
Yes, it will be the correct kit for you.
Yes, it will be the correct kit for you.
Would this work with an m38a1 tank? My jeep is a bit of a hodge podge
Willys Jeep Parts Tech:
MS00203 is what you need for your M38A1
MS00203 is what you need for your M38A1
Are the bends in the line that we get from you exact or do we gently bend to conform as we run the line??
Willys Jeep Parts Tech:
There may be some minor bending you will have to do but for the most part it is a pre-bent kit. Thanks
There may be some minor bending you will have to do but for the most part it is a pre-bent kit. Thanks
This won't work with the Buick v6 225?
Willys Jeep Parts Tech:
That's correct. It's only for the 4-cylidnder. Thanks
That's correct. It's only for the 4-cylidnder. Thanks
do you carry the fuel line kit for the 4-134 F engine in a 1951 truck?
Willys Jeep Parts Tech:
Sorry, that kit you have to bend there locally and make.
Sorry, that kit you have to bend there locally and make.
Will this fit a 1970 CJ5 with the tank mounted to the frame underneath the rear seat?
Willys Jeep Parts Tech:
No, sorry this is for the under seat tank with 4-134 F motor only in the CJ-5.
No, sorry this is for the under seat tank with 4-134 F motor only in the CJ-5.
I bought the kit for a 62 CJ5 but the lines don't match up to the original fuel pump and carb. Is there a diagram available to show me how to position the line to match up with the fuel pump out and the carb? Or did I order the wrong kit?
Willys Jeep Parts Tech:
As long as you have the original dual action fuel pump and Carter YF carburetor it will match up. Please email mike@kaiserwillys.com and we can help out.
As long as you have the original dual action fuel pump and Carter YF carburetor it will match up. Please email mike@kaiserwillys.com and we can help out.
I need a gas line for cj6 1957. Info on page shows cj5. Will it work on cj6?
Willys Jeep Parts Tech:
The CJ-6 fuel line will be the same as the CJ-5.
The CJ-6 fuel line will be the same as the CJ-5.
Do you sell separately ? I want only the line that runs from the fuel pump to carburetor.
Willys Jeep Parts Tech:
No, I'm sorry. This is sold in a kit only. Thanks
No, I'm sorry. This is sold in a kit only. Thanks
Will this fuel ine work on a 51 pickup, from tank to carb?
Willys Jeep Parts Tech:
No, this is for the Willys CJ-5 only.
No, this is for the Willys CJ-5 only.
I purchased the steel fuel lines for a 65 cj5 with 134 f head. Can't figure out how to run them, not even close to getting from fuel pump to carb. Any help would be welcome.
Willys Tech:
Your fuel pump should be marked 'in' and 'out' The in takes the fuel line from the tank and the out goes to the carb.
Your fuel pump should be marked 'in' and 'out' The in takes the fuel line from the tank and the out goes to the carb.
I have a 66 CJ5 with the Dauntless V6. Do you have a fuel line kit for this model?
Willys Tech:
We can help you out and make sure everythng is stock on your vehicle. Please call us toll free.
We can help you out and make sure everythng is stock on your vehicle. Please call us toll free.
do you sell just the prebent line that goes from the fuel pump to the carburetor?
Willys Tech:
For the V6 you have to make your own fuel line.
For the V6 you have to make your own fuel line.
Are there clips in this set? Mine did not come with any. Also can you provide any details on the routing from the fuel tank to the fuel pump? Mine was so chopped and twisted that I can't tell where it was supposed to run.
Willys Tech:
Yes I believe they do. The fuel line is prebent and preflared. It runs from the tank along the frame rail to the fuel pump. Then from fuel pump to the carb.
Yes I believe they do. The fuel line is prebent and preflared. It runs from the tank along the frame rail to the fuel pump. Then from fuel pump to the carb.
where do i get the clips for the frame for the fuel line
Willys Tech:
This fuel line set will come with the clips.
This fuel line set will come with the clips.
I can install it on a cj3b?
Willys Tech:
Possibly with modification.
Possibly with modification.
how can i install a fuel filter on to the steel lines?
Willys Tech:
Just splice it in with rubber lines.
Just splice it in with rubber lines.
YOU MIGHT ALSO BE INTERESTED IN
