Questions & Answers
Questions: Do you offer this mat without the floor shifter holes? My jeep is a Tuxedo Park model with column shift so there's only a transfer case floor shifter.
Question By: Rod Yoder on May 6 2022 3:45 PM
Sorry they do not.
Answer By: Willys Jeep Parts Tech on May 9 2022 7:17 AM
Questions: how well does the mat fit a Willys MB 1942 ?
Question By: phil vallerand on Oct 22 2020 5:41 AM
With some trimming on the sides they are great!
Answer By: Willys Jeep Parts Tech on Oct 22 2020 5:26 AM
Questions: will this mat fit a CJ3b with Husky overdrive?
Question By: Ed on Sep 28 2020 1:48 PM
Yes, this is moulded to the floor. Email firstname.lastname@example.org a pic of your set up floor and I can help.
Answer By: Willys Jeep Parts Tech on Sep 28 2020 10:46 AM
Questions: does this fit tight on a CJ5 1963? is there access for the tool box?
Question By: Paul Stutzbach on Sep 22 2020 9:16 PM
Yes, i had one in my 1965 CJ-5. You just trim around the edges to fit. it is moulded to floor.
Answer By: Willys Jeep Parts Tech on Sep 23 2020 5:47 AM
Questions: i am looking for a floor mat and headliner for a 1950 4 wheel drive Overland Willys pickup. what product should i order?
Question By: Kevin on Jun 1 2020 4:23 PM
818265 is the closest mat available. They are a bit baggy on models priror to 1954. HEADLINER1 is the headliner for the Truck.
Answer By: Willys Jeep Parts Tech on Jun 1 2020 9:41 AM
Questions: I am looking for a molded floor mat for a 1962 Willys truck possibly carpet and sound deadener if this is available
Question By: Kirk katzmarek on Apr 14 2020 1:48 AM
818265 is what you should go with. It has a padding as well.
Answer By: Willys Jeep Parts Tech on Apr 14 2020 5:49 AM
Questions: How many days can you deliver it in Spain? How much would shipping cost? Thank you
Question By: ignacio on Nov 14 2019 4:54 PM
It would take approx a week to get to spain and then thru customs. Please email email@example.com the part numbers and quantities your looking for and your full shipping address and we can quote you out. Thanks!
Answer By: Willys Jeep Parts Tech on Nov 14 2019 9:50 AM
Questions: Will this fit the 1955 Willys Pickup
Question By: Stan on Nov 9 2019 3:01 AM
818265 is what you need for the Willys Truck.
Answer By: Willys Jeep Parts Tech on Nov 11 2019 5:46 AM
Questions: Would these trap in moisture between the rubber and metal floor causing rust?
Question By: Jordan on May 1 2018 2:57 PM
No, ive not seen that occur.
Answer By: Willys Jeep Parts Tech on May 1 2018 9:18 AM
Questions: Can this be modified to fit a 1968 or 1971 Commando with T400?
Question By: Bill Jones on Mar 18 2017 9:46 PM
Sorry, I don't believe it will.
Answer By: Willys Jeep Parts Tech on Mar 20 2017 6:08 AM
Questions: Will these (front and back) fit the intermediate cj's? 1974?
Question By: miller mears on Jan 11 2017 2:59 PM
Sorry, these are only for 1941-71 Jeep.
Answer By: Willys Jeep Parts Tech on Jan 12 2017 6:01 AM
Questions: Looking for a full rubber front floor mat for a 1967 j2000 jeep full size pu truck? Any suggestions? Thx!
Question By: Pali on Dec 21 2016 3:55 PM
Sorry I don't believe anyone reproduces that currently.
Answer By: Willys Jeep Parts Tech on Dec 21 2016 7:56 AM
Questions: I have a 1961 Willys CJ3B: Any idea where I can find floor mats and a jeep cover for my jeep??? Supposed cj3b cover was over four feet too long! I am afraid of similar problem with floor mats. Thanks
Question By: MCCRACKEN on Jul 22 2016 3:05 AM
This is the front floor mat and the rear is part number: 13601.03
Answer By: Willys Jeep parts tech on Jul 25 2016 5:46 AM
Questions: For my 1951 CJ3A - Comments say the rear mat, your # 550995, is a reproduction of the original design. Is this Front Mat, # 554995, also an original design replica ? Also, It doesn't look like the front and rear mats meet. Is there another piece that fits between the front seats, covering where the front mat stops and the rear one starts? Thanks bunches."
Question By: Joy on Jun 24 2014 12:00 AM
Yes this is a properly moulded from mat to the floor board. The area between the seats does not get a mat.
Answer By: Willys Tech on Jun 25 2014 12:00 AM
Questions: 1965 CJ6 - My floor pan was cut up pretty bad with a tranny rebuild. What products can you recommend to cover up this eyesore? The tranny comes through the floor about 2. Thank you.
Question By: greg on Jun 12 2014 12:00 AM
The floor mat would help. We also sell complete floor pans or individual sides. Part number: 688966 would help too.
Answer By: Willys Tech on Jun 12 2014 12:00 AM
Questions: is there a cut out for the accelerator pedal?
Question By: Anonymous on Jun 7 2014 12:00 AM
Yes, the cut out for the accelerator pedal is there.
Answer By: Willys Tech on Jun 9 2014 12:00 AM
Questions: Do these mats have the insulation on the back, like jute (spelling)? tks so much Bruce out.
Question By: Bruce on Sep 15 2013 12:00 AM
They dont really use this on the Jeep mats. Its a rubber mat for easy wash out.
Answer By: Willys Tech on Sep 16 2013 12:00 AM
Questions: You state that all the holes line up, but I don't see a cutout for the transfer case shifters. Do we have to cut those out ourselves?
Question By: Mark on Aug 14 2012 12:00 AM
They are pre-perferated for it.
Answer By: Willys Tech on Aug 15 2012 12:00 AM
Questions: Do these fit properly?
Question By: Mike on Mar 13 2012 12:00 AM
Yes these are the proper moulded mats and all the holes will line up properly.
Answer By: Willys Tech on Mar 13 2012 12:00 AM
Questions: do you use adhesive to lay this in?
Question By: Anonymous on Apr 26 2011 12:00 AM
No it lays flay in the jeep. It is moulded and easy to remove.
Answer By: Willys Tech on Apr 27 2011 12:00 AM
Questions: Do you stock left hand drive floor mats for the overland truck? Thankyou.
Question By: Justin Kennedy on Nov 8 2010 12:00 AM
No sorry, these are for left hand drive only,
Answer By: Willys Tech on Nov 8 2010 12:00 AM