Questions & Answers
Questions: I purchased this part for my 1943 Ford GPW, and after installing it correctly I have a 1/4 - 1/2 inch gap between the cowl and the seal. Not sure what to do with that. Any suggestions?
Question By: Bruce W. Hoylman on Nov 6 2020 4:22 PM
Email firstname.lastname@example.org We need to see some pictures of your windshield frame to help.
Answer By: Willys Jeep Parts Tech on Nov 9 2020 5:39 AM
Questions: Will this fit 1951 willys jeep
Question By: Ron on Jan 26 2020 4:23 PM
674234 is the part number you need.
Answer By: Willys Jeep Parts Tech on Jan 27 2020 5:43 AM
Questions: I have a '47 CJ2A with a CJ3A windshield...is this the right seal or should I go with the CJ3A seal?
Question By: C. Owens on Feb 15 2019 10:22 PM
No, you'll want to use this seal 674234. Thanks
Answer By: Willys Jeep Parts Tech on Feb 18 2019 5:21 AM
Questions: Which direction does the flap go? Assuming it presses against the top of the tub, does the flap go forward (towards the engine) or rearward (towards the passenger)?
Question By: Benji on May 19 2015 12:00 AM
It will only go one way. The seal will curve with your windshield frame arms and I will have a recess for your screws to secure it in the bottom of the frame as well.
Answer By: Willys Tech on May 19 2015 12:00 AM
Questions: there are two brackets attached to my new windshield with thumbscrews. what are they for?
Question By: Charles Berry on Oct 10 2014 12:00 AM
We would need to know your vehicle. Please call us toll free and we can help.
Answer By: Willys Tech on Oct 10 2014 12:00 AM
Questions: what screws do you use to attach to bottom of windshield? I am a customer.
Question By: Frank on Jul 16 2014 12:00 AM
A2475 is the part number for the hardware kit.
Answer By: Willys Tech on Jul 17 2014 12:00 AM
Questions: do you have the screws that hold the seal on and are the holes in the seal counter sunk to fit them?
Question By: Anonymous on May 14 2014 12:00 AM
A2475 is the part number for the install kit.
Answer By: Willys Tech on May 14 2014 12:00 AM
Questions: I have a 1955 dj3a willys jeep and I am wondering if this will fit in for the cowl seal
Question By: josh on Mar 26 2014 12:00 AM
Yes this will fit for the DJ as well.
Answer By: Willys Tech on Mar 26 2014 12:00 AM
Questions: is this weatherstrip kind of square looking at each end ? cj3a
Question By: Bill on Mar 14 2013 12:00 AM
Yes that is correct.
Answer By: Willys Tech on Mar 18 2013 12:00 AM
Questions: will this fit with cj3b-j4c 1961
Question By: Souk S on Feb 20 2012 12:00 AM
Yes this is proper.
Answer By: Willys Tech on Feb 20 2012 12:00 AM
Questions: is tis weatherstriping needed to have good tight fit on the cowl.
Question By: jim on Jan 22 2012 12:00 AM
Yes that is correct. You need to have it or it would be metal on metal.
Answer By: Willys Tech on Jan 23 2012 12:00 AM
Questions: will this fit 1950 jeepster?
Question By: kevin on Jul 31 2011 12:00 AM
No this is for Jeeps only.
Answer By: Willys Tech on Aug 1 2011 12:00 AM