Save 10% Off Transmission & Transfer Case. Enter FEBTCT10

FREE SHIPPING – orders $98+ See Details

Select Your Currency
  • Africa
  • Americas
  • Asia
  • Europe
  • Oceania
Shop Kaiser Willys

Distributor Rebuild Kit (points, rotor, cap, condenser)
Fits 41-71 CJ-2A, 3A, 3B, 5

Part # IAD4008

New Distributor Rebuild Kit

Comes complete with cap, points, rotor, and condenser. Ready for install!!!

For Autolite IAD4008 and IAD4041 distributors. Cap diameter measures 3-5/16"

4-134 engine

Please match numbers off Distributor I.D. plate to ensure correct kit. Should be three letters followed by four numbers.

46-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
55-71 CJ-5

Part # Price





Call for Details

Product Videos

Questions & Answers

Please Wait...

Ask Question Add Answer

All questions will be displayed after moderation. All answers will be displayed after moderation.

Is your cap diameter an ID measurement?

Willys Jeep Parts Tech:
Yes it is.

part # iad4008 is the cap marked with the wire/cylinder #'s

Willys Jeep Parts Tech.:
It wouldn't be because depending where your timing is set/rotor it can change.

Can I order the cap only? If so, what is the p/n? Thanks

Willys Jeep Parts Tech:
Yes, call us toll free.

I have had a problem with the condenser blowing out. I upgraded to a 12-volt system, including a 12V coil, and still seem to have the problem. I have heard a resistor might solve the problem. 1) Is the lack of the resistor the problem? 2) Would I then get a 12V or a 6V resistor. 3) Would a 6V coil and 6V resistor solve the problem? I look forward to your reply. Thanks! ~P.

Willys Jeep Parts Tech:
You have to have a resistor. Either your coil has it built in or you would have one wired in-between the ignition switch and coil if it doesnt.

Do you carry the dust cover for the IAD 4008 or know where can find one?

Willys Jeep Parts Tech:
Salvage yard only. You can email to help.

For 1965 jeep kaiser 4 cylinders engine it 89737 1965 a distributor cap to fit

Willys Jeep Parts Tech:
Please make sure to match your distributor tag numbers or email pictures of your internals to help.

On my 1946 CJ2A, a have an Auto-lite IGW 4189 2C distributer. Does the tune up kit fit it? My points don't seem to be the same model.

Willys Jeep Parts Tech:
See part number: IGW4129

Is this a 6 or 12 volt condenser

Willys Jeep Parts Tech:
They work on both 6 and 12 volt.

Do you have what I believe is a resister. It is mounted on the firewall. The distributor wire is attached to one side and the coil is attached to the other side. I know I need it because without it,it fries the points.

Willys Jeep Parts Tech:
Take an image of and email so we can see what all you are working on there.

Where is the distributor ID plate?

Willys Jeep Parts Tech:
There should be a plate on the distributor itself. Right under the cap. Thanks

can i use.this kit with an electronic distributor?

Willys Jeep Parts Tech:
It would be better to give us a call toll free so we can go over which distributor you have that way we can match the kit up accordingly. Thanks

What is the diameter of the cap in cm?

Willys Jeep Parts Tech:
3-3/8" OD and 3" ID

1956 Willis Jeep, CJ-3, changing from 6v to 12v. Do I use stock 6v points and condenser?'

Willys Jeep Parts Tech:
The IAD4008 distributor will work on either 6 or 12 volts.

Dear , I'm from Chile and I wonder if the distributor kit for CJ2A willys is 12 volts or if the kit is 6 and 12 volts at the same time . ( POINTS , ROTOR , PAC , condenser ) Thank you very much

Willys Tech:
The distributors work on either voltage.

Gap setting for points and spark plugs for '42 Willys Jeep?

Willys Tech:
They are .020 for both.

Are the contact luggs on the Distributor Caps where the wires plug in, made of Aluminum or Brass?

Willys Tech:

i have (restoring a 1951 m38 millitary jeep 24 volt. Has anyone found or used a electronic ignition point set. would like to keep it 24 volt tks bjc

Willys Tech:
I dont believe at this time there is a 24 volt solid state kit available.

What is the correct setting for points and plugs for CJ2A ?

Willys Tech:
.020 for both

Is this 6 volt?

Willys Tech:
They are for either 6 or 12 volt.

What is the gap setting for the points?

Willys Tech:

I can't find the ID plate on my distributor, on a 1964 cj5. I'm trying to order a tune-up kit. Any advice? John

Willys Tech:
There should be a metal tag on the distributor. Sometimes they can be hard to see.
Request Catalog
THANK YOU! Your catalog request has been submitted successfully. Please note:

If your catalog does not arrive within 7-10 business days, call us Toll-Free at (888) 648-4923.

Email Subscription
THANK YOU! You have successfully subscribed to our newsletter.
Contact Form
THANK YOU! Your contact form request has been submitted successfully.
Photo Contest
SUCCESS! Your photo contest entry has been submitted!
Browser warning
The browser you are using to visit our website is no longer supported. For the best browsing experience, please visit us using a different browser.
I understand, close this message