Questions & Answers
I have a 49 CJ3A. I don't have a rear crossmember support plate. Do I need one to install the Pintle Hook? Thanks
Willys Jeep Parts Tech:
I would recommend the 8127710-P for extra support.
I would recommend the 8127710-P for extra support.
Do you sell the pintle hook hardware separately?
Willys Jeep Parts Tech:
Sorry, I dont have that by itself. Thanks!
Sorry, I dont have that by itself. Thanks!
Hi, I have a 66 CJ3b, will the pintle hitch item # A593 match the bolt pattern I have? Mine has a 7 hole bolt pattern, the 4 on top were the hitch would mount is 3.375" x 1.75" Thanks for your help! Marko
Willys Jeep Parts Tech:
The bolt pattern is 3.5” x 1.75” and should match up to your existing bumper in the center.
The bolt pattern is 3.5” x 1.75” and should match up to your existing bumper in the center.
I have a 57 cj3b. is bolt pattern same so as to mount to back with no modifications
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com and i can take some measurements for you and compare to your CJ-3B.
Please email mike@kaiserwillys.com and i can take some measurements for you and compare to your CJ-3B.
How much does it weight? I need to take it overseas
Willys Jeep Parts Tech:
Approx 15 pounds.
Approx 15 pounds.
Will the bolt pattern line up with my 47 cj2a?
WIllys Tech:
This really wasn't used originally on a 2A but it could easily be mounted on the rear cross member.
This really wasn't used originally on a 2A but it could easily be mounted on the rear cross member.
YOU MIGHT ALSO BE INTERESTED IN
