Product Videos
Questions & Answers
My block is already .030 over, and one cylinder has a minor crack which I intend to sleeve. Can this sleeve be bored to .040"? I'd like to clean the bores on the three good cylinders with a .040" bore which will therefore require a .040" bore on the sleeve so that everything matches, is that doable? Thanks
Willys Parts Jeep Tech:
I would really recommend sleeving all 4 and going back to std.
I would really recommend sleeving all 4 and going back to std.
We previously purchased an overhall kit for a 1960's Willy Jeep with standard pistons. 134F-HEAD-KIT Do these piston covers work on standard pistons?
Willys Jeep Parts Tech:
These are piston sleeves. They are for standard pistons. So yes, if you have standard pistons it will work with what you have.
These are piston sleeves. They are for standard pistons. So yes, if you have standard pistons it will work with what you have.
How are the sleevs fitted?(L4-134) No bottom- or top stop, as I can see? Just "squeez fitted"? What tolerance should it be on the bore? Best, Ola
Willys Jeep Parts Tech:
See part number: M5529 install tool
See part number: M5529 install tool
Hi, Will this sleeve be okay to use with 030 pistons. Thanks.
Willys Jeep Parts Tech:
You really wouldn't want to sleeve at .030 - usually you wait until the engine is at 60 or 80.
You really wouldn't want to sleeve at .030 - usually you wait until the engine is at 60 or 80.
Is this price for one set (4 cylinders) or just one cylinder?
Willys Jeep Parts Tech:
These are each.
These are each.
Will this engine sleeve fit this size bore 3.1250"inches and 79.375mm. Regards Christy Wilson
Willys Jeep Parts Tech:
This will sleeve you back down to standard 3-1/8" in the 4-134 motor.
This will sleeve you back down to standard 3-1/8" in the 4-134 motor.
what are the thikness avaible?
Willys Jeep Parts Tech:
3.3" OD - it will sleeve you back down to standard piston 3-1/8".
3.3" OD - it will sleeve you back down to standard piston 3-1/8".
What is the external diameter that are avaible
Willys Jeep Parts Tech:
3.3" OD
3.3" OD
