Save 10% Off Transmission & Transfer Case. Enter FEBTCT10

FREE SHIPPING – orders $98+ See Details

Select Your Currency
Close
  • Africa
  • Americas
  • Asia
  • Europe
  • Oceania
Shop Kaiser Willys

Spicer Style Driveshaft Universal Joint
Fits 41-66 MB, GPW, CJ-2A, 3A, 3B, 5, M38, M38A1

Part # 8126614S

New Spicer Style Universal Joint (4 required per vehicle)

Includes complete universal joint with bearing caps and retainer clips. Attaches yoke and propeller shaft ends together on 4wd vehicles.

Fits:
41-45 MB
41-45 GPW
46-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
55-66 CJ-5
50-52 M38
52-66 M38A1

Part # Price
8126614S

$23.99

MSRP:

$23.99

MSRP:

Call for Details

Questions & Answers

Please Wait...

Ask Question Add Answer

All questions will be displayed after moderation. All answers will be displayed after moderation.

The MB/GPW book lists 2 different part numbers for the rear driveshaft ends: Spicer 1261 and 1268. Are yours compatible with the originals? Also, do the cross "T" parts have groves in the ends to allow grease to pass easily to the needles?

Willys Jeep Parts Tech:
This u joint can be used for all 4 points on the MB/GPW. There is a zerk fitting on these, so grease is able to get to the rollers internally.

Do you sell just the bearing caps & Pins? Thanks. 1964 CJ5 Willys F134.

Willys Jeep Parts Tech:
Give me a call toll free so we can see if we can get that set up for you. Thanks

- I have a Cj3a and need to replace the passenger front knuckle U joint. Is this the correct replacement part? - Also is this the same U joint used on my F&R drive shafts? - My inner axle tubes have FLAT brass washers pressed into them what is required when using the splicer joint ? Thank you for time.

Willys Jeep Parts Tech:
This would be for your drive shafts only. 909476 would be for the axle shaft.
Willys Jeep Parts Tech:
Yes, this is the proper one, they are the same front and rear driveshafts. There are 4 per vehicle.

What size ujoints are these? 1310? What is the diameter of the cap and the length of the ujoint? Thanks,

Hank:
I checked those dimensions and they are for 1310, 297X and 760X. All the same dimensions.
Willys Jeep Parts Tech:
Diameter 1.650 at end caps. Overall length 3.25 end cap to end cap across.

I have a Jeep I built when I was in California to go on the trails. It has a lot of miscellaneous parts on it. The rear driveshaft has spicer u-joints that have a number on the cap (P051), the front ones have a different one (P541) and are smaller. Which ones do I need? The front from end to end is 2.44 and the cap is 1.065. The rear are 3.22 end and 1.076 cap.

Willys Jeep Parts Tech:
Sounds like you have a later CJ-5 1966+ Please call us toll free and we can ID what you have there.

I have a 66 CJ5 with the Dana 27 ront, Dana 44 rear, and Dana 18 transfer case. Dauntless V6. Will these u-joints fit the front and rear driveshafts?

Willys Tech:
In that year you could have these or part number: 937340

I have a universal joint with no snap rings. Instead there is a milled portion of all four ends to accept retaining clips that are bolted to the yoke. The universal joint has to be installed between all four yokes then the end caps with needle bearings have to be pushed onto the ends of the universal joints. Then the retaining clips are bolted onto the yokes to hold the assembly together. I cant find anything like it in any of your catalogs.I need to replace many of these as they are shot.

Willys Tech:
Sounds like you have the cleveland style joint. Part number: 924189 will replace it. They typically used that style on Willys Truck and Station Wagons.
Request Catalog
X
THANK YOU! Your catalog request has been submitted successfully. Please note:

If your catalog does not arrive within 7-10 business days, call us Toll-Free at (888) 648-4923.

Email Subscription
X
THANK YOU! You have successfully subscribed to our newsletter.
Contact Form
X
THANK YOU! Your contact form request has been submitted successfully.
Photo Contest
X
SUCCESS! Your photo contest entry has been submitted!
Browser warning
The browser you are using to visit our website is no longer supported. For the best browsing experience, please visit us using a different browser.
I understand, close this message