Save 10% Off Transmission & Transfer Case. Enter FEBTCT10

FREE SHIPPING – orders $98+ See Details

Select Your Currency
Close
  • Africa
  • Americas
  • Asia
  • Europe
  • Oceania
Shop Kaiser Willys

Original Reproduction Steel Civilian Wheel Rim 16"
Fits 41-71 Jeep & Willys

Part # 640800

New Original Reproduction Civilian Wheel Rim in 16"

New original reproduction 16" x 4.5 steel rim with a 5.5" bolt pattern with inner and outer safety beads. Proper bolt hole pattern for all 4wd Willys vehicles.

Also comes with a single 3/16" offset hole in the raise lug hole area of the disc that identifies rims with the safety beads.

These wheels can be used with or without tubes.

Original reproduction of the Kelsey Hayes rim. Painted in the original Dupont semi-gloss Gray.

FREE SHIPPING ON THIS OVERSIZED ITEM

These are the only DOT APPROVED rims available that are like the original. Be wary of cheap imitations others are selling. They are not DOT approved for road use.

Measurements:
4-1/4" center hole

Fits:
41-45 MB
41-45 GPW
46-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
55-71 CJ-5
50-52 M38
52-66 M38A1
46-64 Truck
46-64 Station Wagon
66-71 Jeepster Commando (C101)

Part # Price
640800

$199.99

MSRP:

$199.99

MSRP:

Call for Details

Product Videos

Questions & Answers

Please Wait...

Ask Question Add Answer

All questions will be displayed after moderation. All answers will be displayed after moderation.

1) If mounting the Firestone NDT Square Shoulder 7.50x16 Tires on these rims, is an inner tube still required? 2) Rims colored white or black?

Willys Jeep Parts Tech:
The Firestones are tube style tires. Its determined by the tire itself. The rims will be as shown in item description and pics. Thanks!

Will a 7.50-16 work on this rim?

Willys Jeep Parts Tech:
Yes you would be able to use that size tire.

Is this the correct rim for a M38? Thanks

Willys Jeep Parts Tech:
It is very similar to the original on a M38. It will mount up no problem.

Will Firestone NDCC 700-16 tires fit on these rims?

Willys Jeep Parts Tech:
yes, that is correct

Will these fit a 11'' Drum conversion without a spacer?

Willys Jeep Parts Tech:
Yes they will.

Will these rims fit on a 2005 Jeep LJ?

Willys Jeep Parts Tech:
Sorry, no they will not.

will these rims work with disc break conversion without spacers.

Willys Jeep Parts Tech:
If you haves disc brakes most times you will have to use a spacer of approx 3/8" to 1/2".

is there a chrome beauty ring available for the 16" rim?

Willys Jeep Parts Tech:
No, unfortunately this is only for 15" rims.

Will the BFG km3 7.5R16 work on this rim?

Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com more information on your aftermarket tire and we can help.

What's the widest tubeless tire size that these rims can accommodate?

Willys Jeep Parts Tech:
A 7.50 is typically as big a tire as you want to go.

Do I need to sandblast these wheels before I paint them Marine Forest Green lusterless…? Or will the paint adhesion be ok as the wheels come painted from Kaiser Willys. Thank you.

Willys Jeep Parts Tech:
They come painted but I wouldn't sandblast. You may want to just prep the surface for the color you would like.

Can I get these rims without paint just primer

Willys Jeep Parts Tech:
Sorry they are already all painted at the factory

My Willys station wagon has warn lockers on the front axle. Will these still fit.

Willys Jeep Parts Tech:
Yes, that is correct.

do i need wheel flaps with wheel #640800, tire # f700-16ND, tube #sku: Tube- 17?

Willys Jeep Parts Tech:
No, Flaps are typically for split combat rims only.

Will the rims fit a 1952 Dunbar M100 trailer?

Willys Jeep Parts Tech:
As long as the bolt patter matches you should be fine. It is a flush mount rim.

Sir, how much does it cost to ship rims to my country, Saudi Arabia? Greetings Abdullah

Willys Jeep Parts Tech:
Please email us your full shipping address and we can help.

Will your 36 in. NDT tire fit on the ORIGINAL REPRODUCTION STEEL CIVILIAN WHEEL RIM 16" FITS 41-71 JEEP & WILLYS?

Willys Jeep Parts Tech:
Not sure what tire your referring to. Email mike@kaiserwillys.com to help.

Can they be purchased in white ?

Willys Jeep Parts Tech:
See item description on color and images.

Are these manufactured by MD Juan?

Willys Jeep Parts Tech:
No they are not.

My 41 MB wheels were 4:00 x 16's. Will you be offering these any time in the near future?

Willys Jeep Parts Tech:
The 2 piece split combat rims are not available currently.

Do these come in black ?

Willys Jeep Parts Tech:
No sorry, But they are easily painted.

I just bought 5 of these for my 1952 Willys Jeep Pickup. My understanding is you can mount the tire itself or tire and tube is that correct?

Willys Jeep Parts Tech:
Just depends on the type of tire you are using. Your tire will be marked the style it is.

Are the FIRESTONE NDT TIRE 6.00 X 16" 6 PLY SQUARE SHOULDER, the correct tire for these 16" x 4.5 steel wheel rims ?

Willys Jeep Parts Tech:
Yes, these work for the original 16" Willys rim used 640800.

Do you have or know what company has the wheels for the 1953 Willys pick up, as you know they are wider than the jeep ones.

Willys Jeep Parts Tech:
We have both tires and rims. They used the same. Give us a call toll free.

What is the shipping weight of one of these rims?

Willys Jeep Parts Tech:
These are approx 23 pounds each

Any news on 16 inch wheels for a 1952 M38A1?

Willys Jeep Parts Tech:
Yes, please email mike@kaiserwillys.com

When do you think the rims will be available

Willys Jeep Parts Tech:
In the next 2-3 week as of 1/7/21 Thanks!

what is the diameter of the center hole? I was told it's a special diameter for a '46 CJ2A?

Willys Jeep Parts Tech:
They are all the same on size 4.25"

What is the STOCK offset and backspace for my '57 FC 150? It has 5 X 5.5 with 700-16s. I want to get some aftermarket wheels that would widen the stance by 1.5 inches on each side. Thanks.

Willys Jeep Parts Tech:
These have a 3-5/8" backspacing

Hi I have a 1980 dodge power wagon the hole in the Center of the rim is 3.5 diameter 5 bolt lugs are 3.1/4 Center and I have supper swampers that are 16x6.5 will this work ?

Willys Jeep Parts Tech:
I do not believe these will work for the Dodge.

Hi there, I'd like to purchase 4 of these please.

Willys Jeep Parts Tech:
We will make an announcement on them. Please make sure to sign up for our newsletter.

Hi, I have used your front and rear disc conversion kits on my Dana 25 and 44. Will these rims fit without spacers? Cheers.

Willys Jeep Parts Tech:
You would need to use a spacer for clearance.

Do these rims also fit my Willys Jeep CJ-5 1966 Swiss military? Thank you in advance for quick reply. Best regards. Urs

Willys Jeep Parts Tech:
Yes, that is correct.

Do you have these in stock?

Willys Jeep Parts Tech:
The rims are not in stock at this time. Please check back with us around the end of the month. Thanks

Will these wheels work on the locking hubs on the front of a 63 willys truck?

Willys Jeep Parts Tech:
Yes, that is correct.

I have a 1972 CJ5 and it has disk brakes on the front. Will the stock 16” rim not work on this vehicle?

Willys Jeep Parts Tech:
Really depends on what your disc brakes are out of. You would have to measure clearances.

Is this a tubeless rim?

Willys Jeep Parts Tech:
It depends more on the type of tire you are using on it.

What is the thickness of the foam and the thickness of the plywood used for the seat bottom? are the bottom and back the same thickness of foam and plywood? Thank you

Willys Jeep Parts Tech:
The upper cushion is typically 2.5" and the lower cushion is typically 3" thick. The plywood is marine grade and 3/4" thick.

I have a '60 CJ-5 and the left front and i believe the right rear have left hand threads? What is the basis for this?

Willys Jeep Parts Tech:
The drivers side typically had LH thread. The passenger side RH thread.

do you still have these? they haven't been discontinued from the manufacturer?

Willys Jeep Parts Tech:
These rims are out of stock at this moment but we should have them coming back into stock around the middle of March. Thanks

i have 1953 willey, don't know what model. I want to buy NDT 600-16, 4 tires, 4 tubes and 4,rims. but I dont know the bolt pattern and the hub holder diameter. what do u recommend ?

Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com and we can help out ID your vehicle.

Hello, What is the tallest and widest non tube tire that will fit these rims? I have a 1957 CJ3B with a 2 1/2 rancho lift. I'm looking to fill up the wheel well and keep a period looking tire. I'm also considering wheel spacers to push the tire out flush to the fenders. Thanks Alex

Willys Jeep Parts Tech:
I dont recommend going over 7.50x16" tires because your will rub on your turn radius without a spacer.

Will the tires FIRESTONE KNOBBY TREAD TIRE 650 X 16" 4 PLY (Item # 650-663510) fit on these STEEL CIVILIAN WHEEL RIM 16" (Item # 640800)? If not, can you tell me some tires that would be more appropriate? Thanks!

Willys Jeep Parts Tech:
Yes, these tires will fit onto the 640800 rim.

Why can't the original 16" steel wheels be used after a disk brake conversion? What are the clearance issues? Could a spacer be uses if you still wanted to have a jeep that looks original?

Willys Jeep Parts Tech:
There can be clearance issues on the inside of the rim. We have have people use spacers too.

What is the part number for tubeless tires for these rims? i would prefer the military tread pattern.

Willys Jeep Parts Tech:
They really dont make a NDT tread that is tubeless. Please call and ask for Mike M. I can go over a few options with you.

Can the tires for the civilian rims be tubeless running on the M38 or do they require the tube?

Willys Jeep Parts Tech:
We have both tubeless and tube style tires for these rims. They will accept either.

Can you use these with your disc brake conversion kit?

Willys Jeep Parts Tech:
You will have some clearance issues. You typically need to go to an aftermarket rim with the disc brake kits. They are readily available anywhere locally.

Hi Mike - do you have wheels to fit the Coker 62962 L78-15 tire? Thanks - Mike

Willys Jeep Parts Tech:
Im not familiar with that tire. Please email mike@kaiserwillys.com its specs and i can find out for you. Thanks!

The rim in the first photo looks different than the rim in the 3rd photo. My rim looks more like the 3rd photo since the gaps look the same size. The first photo has much larger gaps. I own a CJ2A with 16in rims and i believe the are 4.5in ? Do you believe these are the same rims?

Willys Jeep Parts Tech:
The photos are of the same rim, just different angles. They are 5 x 5.5" Thanks

Will 7.50 16 tires work on these wheels?

Willys Jeep Parts Tech:
Once you try to mount a tire large than 700 you run the risk of having rubbing issues. You could possibly need to add spacers to set the tires out some. Ultimately, they will fit though. Thanks

When it says both 6x16" and 7x16" tire fit the rim, what does the 6" and 7" refer to? Is that the bead to bead width?

Willys Jeep Parts Tech:
That is the width of the tire itself.

Will these rims fit a 235/85/16 on a 1962 pickup?

Willys Jeep Parts Tech:
Im not sure exactly what tire that is. Please email mike@kaiserwillys.com and we can try to help.

Would these work for/be correct for a 1952 Willys M38? Unfortunately mine was bought with 15 inch civilian rims and I want the correct military type 16 inch ones.

Willys Jeep Parts Tech:
Yes, these are 16" and very very similar to the original 16" rims used on the military Willys

Will these wheel rims work for radial tires without a tube ? I wanted to use 215/85/16's for highway use as the NDT type tires are rather dangerous in wet weather.

Willys Jeep Parts Tech:
As long as you have a tire that is a non-tube style tire then it should.

I'm looking for rims for what I think is an MBT or M100 trailer. The bearing cap is 4-1/8", so the center whole of the wheel must be at least that diameter... (The axle assembly may not be stock.) What is the center hole diameter of this wheel?

Willys Jeep Parts Tech:
4.25 center hole

Will these fit on a 78' CJ5 with factory disk brakes?

Willys Jeep Parts Tech:
Sorry, i don't believe so.

I notice three different looks to the face of these wheels. I need to match what I have on Jeep. Can we do this? It is the last one in pictures listed.

Willys Jeep Parts Tech:
They are all of the same rim. Just different views.

What is the back spacing for this rim?

Willys Jeep Parts Tech:
3-5/8" is the backspacing

What is the wheel size and bolt pattern for a 1962 CJ-3B? Serial Number: 57348 86143

Willys Jeep Parts Tech:
Typically 15" or 16" - 5 x 5.5"

Do you have a similarly styled wheel for a 56 Willys truck that will mount a 9.00-16 tire?

Willys Jeep Parts Tech:
Sorry a 9.00x16" tire really will not work for a Willys Truck. They are for much larger vehicles.

I have a 1969 Volkswagen "Thing" that has been converted by kit into a 1944 Kubelwagon. The tires and rim are incorrect. I want to convert to a Firestone NDT 6.00 X 16 6 ply tire. I will need new 16 inch rims too. which rims should I use to be somewhat historically correct. I will also need a new back spacer - correct? If so what spacer should I purchase to fit the new rims for the Kubelwagon kit car? Thanks in advance. Loren

Willys Jeep Parts Tech:
Sorry, we really don't get into these vehicles. We just do Willys.

I have a cj3a that I have converted to 11 inch brake drums. Will the 16 inch rim fit over the drums?

Willys Jeep Parts Tech:
Yes, they will accommodate.

Hi, what is the backspacing dimension? I think I saw the answer below but what is the center hole diameter? I need a 16x6 or 16x5 wheel, 3.5-3.75 backspacing, center hole >4in, 5x5.5in bolt pattern. Would this wheel work?

Willys Jeep Parts Tech:
3-5/8" is the backspacing.

What is the proper bolt pattern on 1970 CJ-5 .is 16" the proper size tire ?

Willys Jeep Parts Tech:
5 x 5.5" pattern. This rim is proper for you. 15" or 16" rims were optional on that year.

Will this rim work with the tubeless STA 8-ply Traxion tires that yall offer on here? I believe it will, but just want to make sure before I order them. Thanks.

Willys Jeep Parts Tech:
Yes this should for any tire 7.50 and smaller.

Is this the same look and style as original on a 1949 CJ-3A. I not only want it to fit, which I'm convinced it will, but so do the 1956 15" rims I have on it now. I want the exact look of the original.

Willys Jeep Parts Tech:
Yes, this is the proper rim for your CJ-3A.

I have a 1946 CJ2A. I just did a front disc brake conversion using your kit #376895 and found that the 15" wheels I have will not clear the calipers. Would these 16" wheels work? If not do you have wheels that would?

Willys Jeep Parts Tech:
Originally your CJ-2A would have had 16" rims on there. These rims will not clear the disc brake conversion. You will just need to go to an aftermarket rim with the 5 x 5.5" pattern and you should be all set.

does this wheel have to have a tube with the tire?

Willys Tech:
That depends on the tire you are using, not so much the rim.

when do you recommend using 6 X 16 tires? my m38a1 53 jeep has a spare wheel which is 16X6.00? i reed 4 new rims & tires, I need to make my steering as easy as possible.

Willys Tech:
The M38A1 can used either 7.00x16 or 6.00x16 tires.

I have a 63 truck,the bolt pattern measures 5.25 but everything I look @ says they are 5.5. What is the real size?

Willys Tech:
All Willys Trucks 1946-64 and All Willys Jeeps from 1941-71 are 5 x 5.5 spacing.

What is the most authentic rim/tire (NDT type) combination for a 1946 CJ-2A that you carry?

Willys Tech:
We typically sell this rim and part number: F600-16DN

I have a 1948 cj2a. The person before customized and squeezed in a 289 V8 ford engine. I believe axles (5 x 5.5 bolt pattern) are still original. What do you recommend I change diff or axles to accommodate this very strong motor. I know I'm going to brake something if I'm on it to hard.

Willys Tech:
The axles should be just fine. They are gonna be 5.38 ratio's.

Will this rim fit a 1970 jeepster commando

Willys Tech:
Yes, you should have 5 x 5.5 pattern on that vehicle.

what is the weight of one rim

Willys Tech:
They are approx. 25 pounds

what is the bolt pattern on a Willys MBT trailer.

Willys Tech:
I believe it is 5 x 5.5

will the rims with tires on them fit my 46 cj-2a

Willys Tech:
Yes these are proper for the CJ-2A.

Is there any reason that this wheel would not work with a civilian CJ-3A?

Willys Tech:
These will bolt up properly to the CJ-3A as well.

I have a 1951 cj3a civilian, original axles. What is the diameter of the center hole in the rim? Thank you

Willys Tech:
4.25 like original.

What was the original rim/tire size on the 1947 CJ2A?

Willys Tech:
Typically they were 16 rims like the ones above. These are the correct ones for your Willys.

Are these a primer finish? If so, What final coat of paint would you recommend?

Willys Tech:
These are primer black. Any good automotive paint will do.

I have a 1957 forward control 150. Is this the correct rim. Also what is the correct center hole size? The bolt pattern spacing is also what? Thanks

Willys Tech:
Yes these are the correct rim. They are 5 x 5.5 pattern.

I am installing the disc brake conversion kit ( front ) on a 1951 CJ. Problem is the original wheels will not clear the calipers. Do I use different wheels, or use a spacer between the wheels and hub to create clearance. If wheels, what application. If spacers, do you have them and longer studs available?

Willys Tech:
On some original style rims the disc kit will not clear the inner spacing. Aftermarket rims have to be used then.

I have just acquired a 1961 Willys pickup. The original wheel rims have been replace with a wider rim and tires which make turning unwieldy. I would like to go back to the original rim size and tire which I believe has a narrower footprint and will turn much easier. Is the rim that you have advertised the original size and takes the original wheel size. Thanks for your help. Sid

Willys Tech:
Yes this will be the proper rim for you vehicle.

will this rim fit on a 1946 jeep or a 1964 jeep

Willys Tech:
Yes that is correct. It will work just fine.

Will hub caps for a 65 tuxedo park iv fit on these rims? If not do you know what rims they would?

Willys Tech:
The rims used on that vehicle are different. If you have the original hub caps you will need those specific rims.

what finish do these have,looks like chrome in the pic

Willys Tech:
That is just the glare from the flash. They are black.

Which rim would have been more typical for a 1971 CJ5 15 or 16?

Willys Tech:
Most CJ-5's have 15 rims but 16 were always an option. You see it both ways. Either will work. I prefer the 16.

When using your Firestone NDT or STA NDT 6.00 X 600 tire, is it necessary to use tire flaps or beadlocks to protect the tubes? If so, where would you buy those parts?

Willys Tech:
You dont have to use flaps but alot of people do. It doesnt hurt to. We sell them too. Please call us toll free. We are happy to help.

I own a 1947 cj2a with 16's, does it require modification to put 15 inch rims on it

Willys Tech:
No 15 rims will work too as long as they are 5 x 5.5 pattern.

Is the lug bolt pattern the same on a 15 rim as it is on a 16 rim? I have 15 on it now and want to change to a 16 rim! Will a 7.50 military tire fit OK under my 1946 CJ2A on 16 rims? Thanks in advance, Harry

Willys Tech:
Yes they are all the same pattern. This will be correct rim for you.

What color were the rims on a 1961 CJ5? I have seen old photos with white rims and others that appear to match the body. If the answer is white, do you know what paint code was white?

Willys Tech:
They were a number of different colors. Typically there was a cream color used if it was white.

I have a 1954 Willys Truck. Per chance....is this the same wheel that would have been used on a Ford Truck of this year?

Willys Tech:
Its a 16 rim with 5 x 5.5 spacing.

I recon a 7.00 tyre will fit ok but what about a 7.50 as these are easier to get hold of here in the uk

Willys Tech:
A 7.50 will mount on these rims as well.

Have a '62 4WD Utility Wagon, but appears to be a 15# wheel and having trouble locating the right rims for it?

Willys Tech:
We have them. Please call us toll free.

What is the bolt patter on these Rims? Is it 5x5.5?

Willys Tech:
Yes that is correct just like original.

do these rims have the warning label on them as originals do ?

Willys Tech:
We can possibly get you decal no problem.

Will this #640800 wheel fit the 48/49 Jeepster?

Willys Tech:
No the 2wheel drive jeepster used a different bolt pattern.

whats the original size rim for a '48 cj2a

Willys Tech:
This is the proper size rim for a CJ-2A

I have a 1946 ford pick-up, is this rim similar to this year ford with a 16 rim?

Willys Tech:
It is a 5 x 5.5 bolt pattern.

Did 1952 Willys Trucks have a 5 stud or 6 stud bolt pattern on the rim?

Willys Tech:
All Willys Trucks are 5 x 5.5 wheel spacing and pattern. This is the proper rim for them. Please call me toll free. We can help.

What is the bolt pattern for a 1964 CJ-5

Willys Tech:
These are 5 x 5.5 just like original.

What finish is applied to the rim?

Willys Tech:
These are painted black.
Request Catalog
X
THANK YOU! Your catalog request has been submitted successfully. Please note:

If your catalog does not arrive within 7-10 business days, call us Toll-Free at (888) 648-4923.

Email Subscription
X
THANK YOU! You have successfully subscribed to our newsletter.
Contact Form
X
THANK YOU! Your contact form request has been submitted successfully.
Photo Contest
X
SUCCESS! Your photo contest entry has been submitted!
Browser warning
The browser you are using to visit our website is no longer supported. For the best browsing experience, please visit us using a different browser.
I understand, close this message